Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Quickload double check please

Discussion in 'Handloading and Reloading' started by 627PCFan, Jan 27, 2013.

Thread Status:
Not open for further replies.
  1. 627PCFan

    627PCFan Member

    Joined:
    Oct 18, 2007
    Messages:
    2,008
    Location:
    Sterling, VA
    Can someone kindly run a quickload test for me?

    7mm Rem Mag
    67.5 Grains of h1000
    175 Hornady Interlock Soft points
    Winchester brass, H20 Capacity 74.221.
    Barrel lenth 24 inches.
    COAL 3.3300

    I ran loads from 62 though 67.5 with not a single symptom of overpressure. Max load from Hodgdons website is 64.5 with Nosler Partitions. Now Im wondering if Im really into the red using Hornadys-
     
  2. sliehs

    sliehs Member

    Joined:
    Nov 29, 2012
    Messages:
    1
    According to the the hornady reloading manual max load for h1000 is 60.4 grains with the 175 grain bullets with col of 3.29
     
  3. chris in va

    chris in va Member

    Joined:
    Mar 4, 2005
    Messages:
    6,097
    Location:
    Louisville KY
    Lyman manual shows 61-71gr of h-1000 with a 175gr GSSP.
     
    Last edited: Jan 27, 2013
  4. 627PCFan

    627PCFan Member

    Joined:
    Oct 18, 2007
    Messages:
    2,008
    Location:
    Sterling, VA
    Thats wierd, data seems to be all over the place-
     
Thread Status:
Not open for further replies.

Share This Page