Reassembling 11-87 stock?

[RM]

I wanted to check how to reassemble an 11-87 stock, since the manual isn't too clear. There is a standard washer, a lock washer, and a large threaded nut. After putting the stock on, the standard washer goes onto the wood, followed by the lock washer, followed by the big nut-thingy? Is that correct? Thank you.

 

[ysr_racer]

Yes.

 

[ArmedBear]

My 1100 has a standard-looking washer, with a couple of little spikes on the outer edge of one surface.

If you have these spikes, they go down towards the wood and keep the washer from spinning.

 

[ysr_racer]