Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reload Help Question

Discussion in 'Handloading and Reloading' started by TRguy, Sep 9, 2009.

Thread Status:
Not open for further replies.
  1. TRguy

    TRguy Member

    Joined:
    Apr 23, 2008
    Messages:
    250
    Need a good load powder weight

    9mm
    I have CCI SP 300
    Clays Powder
    Hornady XTP JHP 124gr

    How much powder. Was thinking 3.1grs, could you go heavier?
     
  2. steve4102

    steve4102 Member

    Joined:
    Oct 14, 2004
    Messages:
    2,439
    Location:
    Minnesota
  3. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
    If you don't have a manual to check your data, then you're NOT thinking....get a load manual!:banghead:
     
  4. TRguy

    TRguy Member

    Joined:
    Apr 23, 2008
    Messages:
    250
    I have several manuals, Just asking if someone has worked with Clays and my bullet and had some positive result with different gr loads given my projectile design and weight.
     
  5. MMCSRET

    MMCSRET Member

    Joined:
    Feb 18, 2008
    Messages:
    2,961
    Location:
    North Central Montana, across the Wide Missouri
    please review your primers! You stated CCI 300 ; these are not small pistol primers!!!!
    Please be careful!!!!
     
  6. TRguy

    TRguy Member

    Joined:
    Apr 23, 2008
    Messages:
    250
    I looked at the wrong tray, they are CCI 500 SP, The 300 are my LP for the 45, thanks for catching that.
     
Thread Status:
Not open for further replies.

Share This Page