David Hoback
member
- Joined
- Dec 30, 2019
- Messages
- 870
Try this: Remove all the internal mag parts… spring, follower & mag box look at the mag box and see if it has rub marks. If you look at the box, it has a taper. What needs done is to remove some of the taper. It’s difficult without jigs & a press, but doable. What’s needs done is some of each of the bends need taken out. I magazine the tapered box looking more rectangle.
This is one of the things which has been found over the years to cause this issue. Also, even though you installed a new spring, it may still need “tweaked”. The spring should look like a perfect “W”.
This is one of the things which has been found over the years to cause this issue. Also, even though you installed a new spring, it may still need “tweaked”. The spring should look like a perfect “W”.