warddc
Member
I am loading 9mm using RCBS taper crimp die seperately from the seating die. The round seems to stick in the die when you try to back it out. I haven't seen this with other calibers I load. If I push the uncrimped round in the die by hand, I can feel the brass kinda 'stick' and it takes some force to pull it out. The crimp die seems to work OK otherwise. Its just kind of anoying. I am using only a very little bell on the brass (almost not noticable). I cleaned the die well and even used a Q-tip to put a little CLP in the crimp area. Is there something wrong with the die? Is this 'normal' for 9mm?
dave.
dave.