Dave Markowitz
Member
This afternoon I picked up a Ruger 22/45 Lite (pic at link).
The Lite version of the 22/45 has a thin 4.4” steel barrel surrounded by an aluminum shroud. Combined with the Zytel grip frame, it weighs only 22.8 oz. But what’s perhaps most interesting is that the end of the barrel is threaded 1/2”x28, for the express purpose of mounting a sound suppressor (AKA silencer). From the factory, the threads are protected with a knurled aluminum nut with the same diameter as the barrel shroud.
The Ruger came with two 10-round magazines and a optics rail which allows you to mount a scope or a red dot on the gun. It also comes with a padlock so you can lock the bolt open to prevent unauthorized, and a pistol rug. Overall, it’s a nice package.
After getting the Ruger home I ran a couple patches through the bore, and lubricated it with a generous amount of Castrol automatic transmission fluid. (ATF makes a great gun oil and is a decent cleaner in a pinch.)
Along with my dad I took the Ruger to the range tonight. We put 150 rounds through it. The first 100 were CCI Mini-Mag 40 grain solids. In our experience if a .22 autoloader won’t run on Mini-Mags, it has problems. As expected, it ran perfectly with them.
We also put 50 rounds of CCI subsonic hollowpoints through the Ruger. We experienced two failures of the gun to fully go into battery with the subsonic loads. I’m hoping that if I run a couple hundred more high speed rounds through it, it’ll be sufficiently broken in to offer similar reliability with the slower, quieter ammo.
I noticed after about 50 rounds the the front sight blade on the Ruger, which is held on with one screw, came loose. I noticed before it fell off and tightened it back up with the small screwdriver on my Swiss Army Knife, but tomorrow when I clean the gun I’ll put a drop of Loctite on the screw to keep it in place.
The one thing needs attention is the trigger pull. It’s heavy, with some slack and take up. I’m going to look into something like a Volquartsen trigger to reduce the weight and make the pull more crisp. Aside from the trigger, I’m pleased with the Ruger 22/45 Lite.
Of course, the other accessory I am seriously considering is getting a suppressor for it. My first step with be to form an NFA gun trust, then decide which can I want to buy. For more information on such trusts, check out David Goldman’s blog.
All in all, a fun night.
The Lite version of the 22/45 has a thin 4.4” steel barrel surrounded by an aluminum shroud. Combined with the Zytel grip frame, it weighs only 22.8 oz. But what’s perhaps most interesting is that the end of the barrel is threaded 1/2”x28, for the express purpose of mounting a sound suppressor (AKA silencer). From the factory, the threads are protected with a knurled aluminum nut with the same diameter as the barrel shroud.
The Ruger came with two 10-round magazines and a optics rail which allows you to mount a scope or a red dot on the gun. It also comes with a padlock so you can lock the bolt open to prevent unauthorized, and a pistol rug. Overall, it’s a nice package.
After getting the Ruger home I ran a couple patches through the bore, and lubricated it with a generous amount of Castrol automatic transmission fluid. (ATF makes a great gun oil and is a decent cleaner in a pinch.)
Along with my dad I took the Ruger to the range tonight. We put 150 rounds through it. The first 100 were CCI Mini-Mag 40 grain solids. In our experience if a .22 autoloader won’t run on Mini-Mags, it has problems. As expected, it ran perfectly with them.
We also put 50 rounds of CCI subsonic hollowpoints through the Ruger. We experienced two failures of the gun to fully go into battery with the subsonic loads. I’m hoping that if I run a couple hundred more high speed rounds through it, it’ll be sufficiently broken in to offer similar reliability with the slower, quieter ammo.
I noticed after about 50 rounds the the front sight blade on the Ruger, which is held on with one screw, came loose. I noticed before it fell off and tightened it back up with the small screwdriver on my Swiss Army Knife, but tomorrow when I clean the gun I’ll put a drop of Loctite on the screw to keep it in place.
The one thing needs attention is the trigger pull. It’s heavy, with some slack and take up. I’m going to look into something like a Volquartsen trigger to reduce the weight and make the pull more crisp. Aside from the trigger, I’m pleased with the Ruger 22/45 Lite.
Of course, the other accessory I am seriously considering is getting a suppressor for it. My first step with be to form an NFA gun trust, then decide which can I want to buy. For more information on such trusts, check out David Goldman’s blog.
All in all, a fun night.