Ruger LCR in depth Review

Status
Not open for further replies.
Quote:
"The 525 price point is terrible. Stores around here have them at the most at 450. I have seen some incredible prices online though."


I've seen them as low as $ 399.00, and holding...
 
I am on the fence right now between the Ruger LCR and the S&W 642...I'm leaning towards the LCR. Once thing I have heard a couple "complain" about is the size of the grips for pocket carry.

Any input?
 
Works fine in dungarees, cargo pants and shorts. Also good in light jacket and/or hunting vest, inside pocket.

Closer fitting or smaller pockets? A holster is probably in order.
 
I agree with DMZ. Drawing from a pocket holster also takes some practice and would probably be a chore if you were under attack but that goes for pocket carry with any grips.

I'll take slightly more bulk for a more shootable product. The LCR is still significantly smaller than a 442/642 with Hogue Monogrip.
 
Been pocket carrying my LCR for a month now, using a Desantis Nemesis in a cargo pocket- I pretty much forget its there now.

For putting it in a front pocket? Forget it, unless you don't mind a heft bulge. I can't see a 642 being any different though- I guess it depends on your pants.

I have made the decision since I started carrying to pretty much convert my pants wearing to cargos only.
 
Bell charter oak custom holsters. They have a nice IWB available for the LCR. Build time is stated on the website.
 
Picked up one today and looked at it. Very light, concealable . BUT, the cylinder wobbles. It is not stationary from side to side, front to back or up and down. Tried three more, same problem. Gun store owner and I looked at each other, shook our heads and said why on earth would Ruger put their name on something like this. AND that trigger that has to be let go all the way forward is going to get someone killed. Excellent report by the way.
 
Trigger all the way forward?

Every double action revolver I own requires the trigger to fully travel back forward before firing the next shot. Are we comparing this to a semi-auto trigger or is there something extra funky about the LCR trigger?
 
Picked up one today and looked at it. Very light, concealable . BUT, the cylinder wobbles. It is not stationary from side to side, front to back or up and down. Tried three more, same problem. Gun store owner and I looked at each other, shook our heads and said why on earth would Ruger put their name on something like this. AND that trigger that has to be let go all the way forward is going to get someone killed. Excellent report by the way.

Are you referring to when the cylinder is locked in place? There's no play at all on mine, a bit when it's open but that's inline with other revolvers I own.

How will the trigger action get someone killed? I would hope anyone that carries the LCR would have many practice trigger pulls (dry and live) and would therefore be aware of letting the trigger return forward...
 
No cylinder wobble in mind.

Some people think it makes them a real pistolero to talk about short reset. Maybe it's valid concern for a long-time Glock shooter trying to transition to a Sig but for a revolver, let the trigger all the way out (Smiths included).
 
Just for reference, the trigger on the LCR is akin to the superb trigger on the KAHR PM9 and their other DAO models. I believe it's a bit longer, but it's indeed the best stock trigger you can buy in my opinion. It's the same from start to finish with incredible smoothness.
 
I'll only own one DA revolver, The LCR, so trigger reset shouldn't be a problem.

My wife dry fired it and asked. " You sure that's a Ruger??"
 
I'm happy with my 340 M&P. As light as the Ruger with a tritium front sight and .357 capability.

Same here but if I was still carrying my 642 I would certainly give it a look.
CT grips would be a +.

I suspect that it would work fine in a Mika Pocket Holster for pocket carry.

http://www.frontiernet.net/~akim/

Many J Frame pocket carriers have been using Robert's superior product for years.
 
I'll be Reviewing my new LCR in a couple weeks- when holsters from High Noon and other products arrive.

I can't wait to take it to the Range!
 
I bought LCR for my wife last week with the Crimson Trace Laser Grip for $650 out the door. The recoil is a little much for my wife but I am sure after a few more rounds I am sure she will like it.

I just checked it for cylinder wobble---none----locked or open. I also could not find any reason to fault the trigger, it is as good or better than my other wheel guns.. I prefer the LCR trigger over my S&W 642.
 
Handloader, 2009 has a LCR Review

by Charles Petty. Hot off the press, as it were--just arrived today. I've only scanned it, but I found two items of interest:

1. There is a lock--apparently it is buried beneath the grip.

2. His velocities seemed to me to be a bit low: for example,
GDSB 38+P 135-gr: 828 fps​
Rem 130SCT: 843 fps​

As some of you will know, I am a pretty-commited M&P340 owner, and I have a bias against plastic guns. This thread's OP and comments about the trigger on the LCR have at least got me curious about it--I'll probably go to the LGS tomorrow to check it out.

Jim H.
 
I've been carrying mine for a week now both in pocket in a blackhawk holster and in the smartcarry. Gun is joy to carry...almost forget it's there which is nice in comparison to trying to get comfortable carrying a G30. I've been to the range once and put 30 or so rounds through it to get a feel and it was great. Only shot a 340pd before in .357 so not a lot of j-frame experience..but the trigger is great and recoil manageable with +p. Glad I added this to my collection.
 
not at all like kahr trigger

m2steven:

i'm not looking to start one of these nonsensical bulletin board debates but the lcr's trigger is NOT at all like the kahr's.

i'm 2,000 rounds (and a couple o' new springs) into my pm45 and 300 rounds into my lcr and there is no question the lcr is a better trigger. the kahr trigger is lighter (you can easily use just pad of the index finger as with a 1911), but the kahr is also much longer and can really wreak havoc on your sight alignment under stress (shoot an idpa bug gun match you'll know what i mean).

i've never been a wheel gun guy (was born and raised on the 1911 back when going to gunsite meant sleeping in a tent) but when dress code or circumstances don't permit the 1911, i've always gone to a kahr. this lcr will now replace my kahr (no reasonable offers refused if you're in the market :cool:). you will not believe how light this lcr is, how tolerable the recoil, how good the notch rear site is, how slim the profile, etc., etc., etc. there's no question the kahr is more accurate, but the lcr is more than passable and just disappears in a jacket pocket in a way the kahr, with that extended mag base, just won't. not to mention if you've got a kangaroo or a smart carry forget it.....this thing carry's as if it were an extra extended mag rather than a gun.... you'll forget you're heeled. hell you can pocket carry in sweat pants and it won't pull down even with an untied drawstring (no more stashing guns in lockboxes around the house...this thing can be on you at all times). i have to admit i've thought civilians who carried a back-up were paranoid. most of us will never need to reach for our primary carry gun, let alone draw let alone fire. who needs a b-u-g. but this thing is so light and unobtrusive, if my 1911 is on my waist, its in my smart carry or my kangaroo. its so light it just doesn't make sense not too.

if you're an office type, the difference in carry-ability/concealability will mean the lcr's a one stroke draw-away in your strong side jacket pocket at times when the kahr would have bee in in your briefcase or tucked away in your waist band or small of back.

again i aint a wheel gun guy. i'm old and brainwashed. i think anything other than a 4.25 inch 1911 with adjustable sights and a 10 round chip mccormick mag is settling. and i most certainly don't work for ruger, but all that said, this little 13.5 ouncer is the most interesting thing to hit the ccw market since Gaston Glock decided to use polymer.
 
They still make LCRs, and they are much lighter to carry all day than a 4 inch .357 service Magnum.

R-Hogue.gif
 
I did a post doing a quick evaluation of my LCR. I don't have any complaints with it. The trigger is far better than my old J frame or any Smith J-frame I've handled and cycled. As far as allowing the trigger to return to the full forward position, there are other revolvers which have the same necessity. This is a practice/training issue, not a gun issue.
 
Status
Not open for further replies.
Back
Top