Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Savage 24v

Discussion in 'Gunsmithing and Repairs' started by Mot45acp, Nov 26, 2006.

Thread Status:
Not open for further replies.
  1. Mot45acp

    Mot45acp Member

    Joined:
    Oct 28, 2005
    Messages:
    1,312
    Location:
    TX
    I got a freebie Savage 24v that is in need of new barrels (.222 over 20 ga)
    The previous owner chopped the barrels to a very illegal length, then welded 12 ga barrels on it to legalize it. Yes I know somewhere an angel is crying. Ive tried gunbroker, numrich and of course savage. I have seen 2 other 24v's both with different barrels than mine and eachother in the same caliber. Short of having local smith turn me a new set, where can I find some?
    Thanks
    Mot
     
  2. Jim K

    Jim K Member

    Joined:
    Dec 31, 2002
    Messages:
    17,754
    Try www.gunpartscorp.com and cross your fingers. IF they have them the set will run over $70, and should be installed by a gunsmith. so the whole thing may not be cost effective.

    Jim
     
  3. Nhsport

    Nhsport Member

    Joined:
    Apr 23, 2006
    Messages:
    581
    I suspect that this one is not going to fly.I can't see any solution that isn't going to cost more than a used gun. At any rate look around and fint what it would cost you for a used gun so you have a solid starting point.
    Good luck! Don't be surprised if you end up running the gun through the bandsaw
     
  4. Mot45acp

    Mot45acp Member

    Joined:
    Oct 28, 2005
    Messages:
    1,312
    Location:
    TX
    Looking For....

    I'd be happy in the $200ish range the gun was free to me, so a $200 multi caliber gun would be worth it
     
Thread Status:
Not open for further replies.

Share This Page