Show us a picture of your reloading bench

[Dentite]

Just picked up a 550B so I cleaned out everything out of my bench and reorganized everything. I didn't want to take up more of my bench with another press on the front of it so I used Inline Fabrication's really nice quick change mounting system.

Set up to use Rockchucker:


Takes one minute to swap to the 550B:


Also using Inline Fabrication bullet bin and empty case bin in addition the LED light system.


Overhead view of quick change system.


Some shelves would be nice but for now I have everything jammed in the drawers and under the bench.

 

[gahunter12]

Dentite nice RL550b setup you have. I have my XL650 tricked out with Inline Fab products also. I would like to do the same with my RL550b, and Rock Chucker.

 

[cmcgehee]

...

 

[cmcgehee]

Reloading Workbench

Mine is small, plain & simple

 

[Dentite]

Gahunter I noticed yours in the earlier photos. I've been impressed with the Inline Fab products. Solid and well thought out. I also have roller handles from IF on both my presses.

Your reloading room is awesome. I'd love to have that much space.

 

[gahunter12]

Gahunter I noticed yours in the earlier photos. I've been impressed with the Inline Fab products. Solid and well thought out. I also have roller handles from IF on both my presses.

Your reloading room is awesome. I'd love to have that much space.

Thanks man! I have pretty much finished it up for now. I hope to load some ammo tonight to try things out!

 

[jell-dog]

Mine is small, plain & simple

Very nice work on your "small, plane & simple" reload bench!
I sure like the idea of under bench drawers.
I just received my Lee Classic 4 Hole Turret press, and the Inline-Fabrication base plate with 2 adaptor plates, 1 for my ROCKCHUCKER and 1 for my new Lee Turret press and storage plate for press not in use, all for $88 including shipping.
I cannot say enough about the quality, workmanship and customer service!
Great CLEAN bench!
Now, get it messy!
JD

 

[lauderdale]

Super nice fella's! Ive been following most new posts/threads on Reloading benches and builds. Can you tell me were you can get one of them stools? Im kind of out in the woods/ bad legs/not many wholesale stores. Inline fabs. o-lord there goes another bunch of $$$.

 

[gahunter12]

Super nice fella's! Ive been following most new posts/threads on Reloading benches and builds. Can you tell me were you can get one of them stools? Im kind of out in the woods/ bad legs/not many wholesale stores. Inline fabs. o-lord there goes another bunch of $$$.

Check out Harbor Freight. I looked today in there website, and they had 1 with flames on the seat for $39 if I remember right. I'm thinking about getting one. I would really like to move my Rock Chucker up on a Inline Fab Ultramount also. The stool would set me up where I could do so.

 

[gahunter12]

Here's some updated pics now. I am finished for now, but still have a little more left to do. I want to hang some cabinets, and finish staining, and installing my lower shelves. My hunting dues are coming up, so I need take care of that before buying cabinets.

 

[lauderdale]

Thanks. I load at my reloading bench with a desk chair like you have in one of your previous photos. But looking to replace 1/or2 tall bar stools @ my gun cleaning/work bench/area. 1 hour away H.F. cool! (your work shop looks great!WOW! What is your heat source?

 

[Berserker]

Just built two book shelves not in the picture. I am having trouble with drilling the first hole in the new top.

Last month I wanted to load some 30-06, but then I decided I need to upgrade, and still havn't loaded any yet. Room is getting cleaner though. I have swept most of the floor.

I think I am going to keep the pedastal for my lee press. I like it. The bench will just contain the mess and make things easier.


Has it been brough up all the money we are saving on reloading?

 

[gahunter12]

Thanks. I load at my reloading bench with a desk chair like you have in one of your previous photos. But looking to replace 1/or2 tall bar stools @ my gun cleaning/work bench/area. 1 hour away H.F. cool! (your work shop looks great!WOW! What is your heat source?

Thanks man! It took a while to finish, but very proud of it! I use a sealed Oil heater like this. They are super safe, and heat a well insulated room that size very well. Once it stabilizes the temp, I run it on low to keep the temp around 65*

 

[Berserker]

While I am impressed with many of the set ups here, they make me want to expand just to keep up. I do like the ingenuity in some the folding types to fit in small places.

Reason I put mine up, is to show what can be done with just pedastal mount. Though the floor around me was covered with junk.

 

[lauderdale]

Nice/ you planned that to the T.

 

[kirk37r]

New Bench

Finally moved from the 5' foldup table to A dedicated room for my gun stuff and A new bench.
Still needs some finish work but its coming together.
Before and now. Its amazing how empty it looks with room to put things instead of just in A pile

 

[gunnels]

My bench is just a turnkey solution I got from Lowe's at a Black Friday sale but it seems to do the trick.

[/URL][/IMG]

 

[Matthews007]

New to site and looking for steel sig 238 trigger

I saw a post from some time ago from HisSoldier telling about some steer sig 238 triggers. I need two of them but I seem to be having trouble contacting the poster HisSoldier. Until I get more familiar with this site It would be nice to receive an e-mail at [email protected] about the purchase of a couple of triggers..

Thanks, I'll be watching my e-mail while I'm trying to figure this site out.

 

[Artofgolf]

Welcome aboard Matthews007

Although I can't help you with the triggers you're searching for, you may consider posting in the Gunsmithing & Repairs thread. I'm sure someone will chime in with some help.

 

[ohiobuck74]

Here is mine. It's a work in progress.

 

[kirk37r]

Finally done

The bench is finally complete, Less the Shotshell reloader that I will add this weekend. The only thing left is flooring but that will happen in the fall.

 

[jell-dog]

Very nice setup!
JD

 

[Cemetery21]

Kirk, you can shorten up that Lee Turret handle and save some arm extension, if it works for you.

 

[kirk37r]

Kirk, you can shorten up that Lee Turret handle and save some arm extension, if it works for you.

Do you find the leverage to be different with the shorter handle?

 

[Cemetery21]

Leverage is probably reduced some, but I don't size magnum rifle. Mostly, I load pistol and 20 and 22 bottleneck calibers and there is plenty of leverage for those. I just played with the length until it felt right and the bottom end of the lever didn't hit the bench. It just seemed like too much travel with the handle all the way out.