gilgomesjr
Member
My gun area...
I don't have any pictures of my first attempt at a loading bench. This is a bench I bought from Harbor Freight Tools and built a hutch on top to match it...
Another shot, showing more of the work area...
Another shot showing a bit more...
I built another bench and hutch to match the first one and installed a safe in one side...
I built the new hutch double deep in order to take advantage of space available...
Here's a full view, showing an added PC and TV...
Some fairly big changes... I built new doors for the cabinets, veneered the rest of the front of the workbench, built a new bookcase for the left side... consolidated the TV and PC...
Finally got around to replacing the old pegboard and border...
Another angle...
I used the drawer from the workbench that had to be removed to make way for the presses, by cutting it down and fitting it into the hutch...
A towelholder I built in the same style as the bench... ;-)
Also made a turret holder for the Lee turret press...
The scales area of the bench...
Here's some detail of the pegboard. The screw covers are the cut down backs of .45ACP shells...
Added a few old metal signs...
I don't have any pictures of my first attempt at a loading bench. This is a bench I bought from Harbor Freight Tools and built a hutch on top to match it...
Another shot, showing more of the work area...
Another shot showing a bit more...
I built another bench and hutch to match the first one and installed a safe in one side...
I built the new hutch double deep in order to take advantage of space available...
Here's a full view, showing an added PC and TV...
Some fairly big changes... I built new doors for the cabinets, veneered the rest of the front of the workbench, built a new bookcase for the left side... consolidated the TV and PC...
Finally got around to replacing the old pegboard and border...
Another angle...
I used the drawer from the workbench that had to be removed to make way for the presses, by cutting it down and fitting it into the hutch...
A towelholder I built in the same style as the bench... ;-)
Also made a turret holder for the Lee turret press...
The scales area of the bench...
Here's some detail of the pegboard. The screw covers are the cut down backs of .45ACP shells...
Added a few old metal signs...
Last edited: