Sig Sauer SP2022 trigger issues

[Siggity Sal]

I was shooting a brand new Sig sp2022 9mm today and it was having issues with the trigger not resetting it would happen about twice per 15rd mag, it would have to be pushed manually forward to reset.

Shot 100 rds today through it.

Any one know what could be causing this?

I called Sig and they said to ship it back to them, but before that is going to happen I wanted to hear some opinions on what could be causing this, I stripped it before shooting it and oiled it thoroughly.

 

[rcmodel]

Most likely a manufacturing bur or metal chip got left in the lock-work.

It might blow out with an air compressor, or a good hosing out with gun scrubber.
Or it might go away with further lube & break-in.

On the other hand, it might not.

I'd send it back to SIG and let them try to do it right this time around.

rc

 

[1SOW]

Could be a trigger return spring problem if it resets manually. Visually check it (spring tangs seated/not broken) as you pull the trigger with it broken down.

Sig used to be good about sending a shipping label and returning it to you promptly, but now-a-days I don't know.