Wingrider72
Member
- Joined
- Jul 3, 2011
- Messages
- 4
Well, turned out my first couple of reloads this evening and already need some help. Set my dies as described in Lee's instructions, but on final inspection, there is somewhat of a "bell" or what I would call a "bottleneck" where the bullet is seated in the case.
I'm loading 9mm Winchester 115 gr. FMJ with 4.8 gr. of Unique in once fired brass.
Any help is greatly appreciated.
I'm loading 9mm Winchester 115 gr. FMJ with 4.8 gr. of Unique in once fired brass.
Any help is greatly appreciated.