Fine Figure of a Man
Member
Who is using it and has it produced accurate loads?
I ran a little through a 7mm-08 with a 22 inch tube just to check velocity.
With 140gr Noslers I got a little over 2900. With 150's I got a bit over 2800 with the first round then started getting erratic readings from the crony due to poor lighting.
The velocities are great if the loads prove to be accurate. The only other powder I have used in 7-08 is Varget, with very good results.
I have a Remington 700 action that could could get a 7-08 barrel. If StaBALL produces good accuracy with those velocities I may go with a shorter tube, probably 20 inches.
I ran a little through a 7mm-08 with a 22 inch tube just to check velocity.
With 140gr Noslers I got a little over 2900. With 150's I got a bit over 2800 with the first round then started getting erratic readings from the crony due to poor lighting.
The velocities are great if the loads prove to be accurate. The only other powder I have used in 7-08 is Varget, with very good results.
I have a Remington 700 action that could could get a 7-08 barrel. If StaBALL produces good accuracy with those velocities I may go with a shorter tube, probably 20 inches.