41wheelgun
Member
- Joined
- Jan 14, 2012
- Messages
- 93
Tonight I was prepping some WCC range pick up brass and during the swagging process this brass was so difficult to remove off the small primer pocket head from a RCBC primer pocket swager tool. I ran this brass three times through the swagging process, checking my setup each time. ON most of the brass I had to slam my press handle two or three times or hit it with the heel of my hand before the brass would come off the head,
Has anyone had this problem, or is the brass thicker on WCC brass in the primer pocket area than other makes of brass.
Has anyone had this problem, or is the brass thicker on WCC brass in the primer pocket area than other makes of brass.