I have a ASG Rifle I got about two mouths ago now don't Work..ASG PHONE # Of course no Answer..I have E mail them but No Reply ?? So they all want to Sale but to bad after That...Been in Air guns over 30 years ..also just bought a Umarex Rifle...Now thinking about Getting Out of the Sports..I have now 14 Air Rifles...
They want your Money but can't get help
- Thread starter Paul Alan
- Start date
- Status
bikerdoc
Moderator In Memoriam
PSA from the Mod
If you sell use our trading post
If you sell use our trading post
Bill_in_TR
Member
A little more information besides just "don't work" might help you get some assistance from someone on the forum. Sorry to hear you are having a problem. But if you have been in airgunning for thirty years and have fourteen airguns then one problem air rifle doesn't seem like a reason to get out of the sport. As a matter of fact by now you should have a reasonable amount of experience to diagnose your problem. Or just write it off as a bad experience and move on to a different air rifle.
Septicdeath
Member
- Joined
- Jan 12, 2020
- Messages
- 566
What brand of rifle is it? What seems to be the problem you are having with it. I'm not familiar with this brand. Is it a pellet rifle? Will try to help if you give the information. Other than it don't work. 14 good rifles and one bad. Not a great reason to give it up.
Have 35 air rifles and have always been able to fix anything that went wrong. They are pretty simple mechanically.
Have 35 air rifles and have always been able to fix anything that went wrong. They are pretty simple mechanically.
It's a ASG tac 4.5 air Rifle..two months in the co2 leak out real fast...easy to take apart.. The small piece that you can take out with a screwdriver were the co2 goes is missing... If I could find the hold unit I would buy it..(what the co2 fit in)...Can not found parts Anywhere...The rifle is real Accurate..thanks for Reading
Septicdeath
Member
- Joined
- Jan 12, 2020
- Messages
- 566
Try these guys they usually have or can get parts.
https://www.pyramydair.com/s/m/ASG_TAC_4_5_CO2_BB_Rifle/3672
ASG TAC 4.5..as you may see this rifle has No screws -just pins.. It took me about 5 minutes to take apart... Now I do Not know anything about the c02 part ?? Again the co2 will leak out very Fast...ASG for USA does not Sale parts for this Rifle..Over seas
Can you get a good picture of where rhe co2 goes into the valve assembly? it LOOKs like your seals still there, but i could be wrong. If thats not it, most likely its a bad seal in the valve train.
Im sorry i forgot to ask, but does it leak down rhe barrel or out the grip sides of the gun.....That literally should have been my first question, i just assumed it was leaking out the grip.
Im sorry i forgot to ask, but does it leak down rhe barrel or out the grip sides of the gun.....That literally should have been my first question, i just assumed it was leaking out the grip.
Co2 goes everywhere Fast...I can't take this apart cause I have no ideal...
Thanks that picture shows that the seal on the piercing assembly is still there.
If its spraying out of everywhere then one of the body seals in the valve has likely failed, or the assembly has come loose. Let me do a bit more research, im betting that actions based off one of the handguns, and you maybe able to use a seal kit from repair the rifle.
If its spraying out of everywhere then one of the body seals in the valve has likely failed, or the assembly has come loose. Let me do a bit more research, im betting that actions based off one of the handguns, and you maybe able to use a seal kit from repair the rifle.
- Status
