Thompson Center T/CR22 Barrel and Stock

[Orion8472]

I was just wondering what the Thompson Center T/CR22 Barrel and Stock would be worth [fair value] if I decided to get a different barrel and stock for my rifle. Obviously, I wouldn't need them any longer, but maybe someone would.

I haven't fired very many rounds through the barrel, and both still look pretty much new, especially the stock.

Comments?

 

[Dave DeLaurant]

Well, I bought a new Magpul/TC stock off either eBay or Gunbroker for a project in 2018. My recollection is that I paid around $75 for it then.

 

[Orion8472]

The OP may have been misleading. I currently have the factory stock and barrel on my T/CR22, but am considering a Magpul stock [maybe a nicer wood laminate stock] and a KIDD 16.5" barrel. I would then sell the factory stock/barrel. I was wondering what would be a fair amount to ask?

BTW, Dave,.....nice looking barrel and sight combination!

 

[BigBlue 94]

The OP may have been misleading. I currently have the factory stock and barrel on my T/CR22, but am considering a Magpul stock [maybe a nicer wood laminate stock] and a KIDD 16.5" barrel. I would then sell the factory stock/barrel. I was wondering what would be a fair amount to ask?

BTW, Dave,.....nice looking barrel and sight combination!

I would say no more than 75 for the barrel and 25 for a cheapy stock (not familiar with the TC) or 50 for a nicer wood stock.

 

[LiveLife]

considering a Magpul stock ... and a KIDD 16.5" barrel

T/CR22 factory stock is essentially Magpul stock. If you are thinking about getting the Magpul stock so you can use a wider diameter bull barrel, T/CR22 factory stock has an insert that can be removed to free-float a bull barrel - https://www.thehighroad.org/index.php?threads/real-world-accurizing-22lr-on-the-cheap.898035/

Here's my T/CR22 with stock barrel (Under 10/22 Collector #3)

And with KSA bull barrel free-floated with insert removed

 

[Orion8472]

I thought about that, but don't like the gap between the stock and the barrel if you're looking at it from the top. It's too bad there isn't a bull barrel insert you can get for the stock.