Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

TULA Primers

Discussion in 'Handloading and Reloading' started by jsnake, Aug 22, 2011.

Thread Status:
Not open for further replies.
  1. jsnake

    jsnake Member

    Joined:
    Jun 11, 2009
    Messages:
    67
    Location:
    Christiansburg, VA
    I could not resist the $17/K primers at the gunshow. Bought 2k SPP for trials. I have read (here and elsewhere) that seating may be tougher and likewise the root of many problems noted.

    I loaded 100 rounds of various 9mm loads with my cast boolits as well as berry's bullets. Each round was visually inspected for primer seating as well as plunk tested in multiple barrels (glock and cz).

    I don't see these as being any harder to seat using a Dillon Square Deal B.

    I will shoot this afternoon and report back.

    THE PRICE CANNOT BE BEAT!...

    Stay tuned.
     
  2. sirgknight

    sirgknight Member

    Joined:
    May 3, 2009
    Messages:
    6
    Location:
    Abbeville, Georgia
    Can't comment on Tula, but I love Wolf primers. They are made at the same plant, just a different label.
     
  3. ny32182

    ny32182 Member

    Joined:
    Oct 17, 2003
    Messages:
    5,733
    Location:
    Clemson, SC
    I've run through 5k Wolf and about 3500 Tulas so far in my stock G34 with no issues to report. It is an all stock trigger with no components ever replaced and probably somewhere around 20k pulls on it.

    I gave a couple hundred to my buddy to try in his G34 with aftermarket trigger work (not sure what the complete list of mods is, but I know a lightened striker spring is one of them)... he had 4 out of the first 100 fail to light.

    Therefore in stock triggered guns, I say fire away; if you have light competition trigger(s) I'd recommend a small trial first before buying in bulk.
     
  4. res45

    res45 Member

    Joined:
    Sep 23, 2007
    Messages:
    554
    Location:
    North Carolina
    Tula/Wolf are the same primer made by http://www.flame.murom.ru/en/default.htm in Russian. I personally haven't had any issues seating them in pistol or rifle case regardless of size.

    They are a bit harder,if you have a weak firing pin spring or light striker or hammer spring you may get some FTF on occasion. My Ruger BH eats them like candy.
     
  5. dagger dog

    dagger dog Member

    Joined:
    Jan 30, 2008
    Messages:
    2,695
    Location:
    SO. IN
    If you have any problem seating, just use a crimp remover or a 45 degree counter sink to radius the edge of the primer pocket. They will slide in like butter!
     
  6. GLOOB

    GLOOB Member

    Joined:
    Sep 16, 2007
    Messages:
    5,941
    I've measured them with my calipers. The Tulammo SPP are actually smaller in diameter than CCI. And they're easier to seat, AFAIC. The cups are a little taller and softer, though, so you have to watch out with certain brass. Tight primer pockets can leave the primer dented/flattened before they'll seat all the way. Shallow/angle-bottomed primer pockets (some older Winchester 38 special brass I had comes to mind) can lead to full seating with the primers still protruding a hair past flush.

    I have had a couple rounds where I accidentally primed too hard, and they didn't go off. When I removed and disassembled the primers, the priming compound wasn't visibly cracked. I think they didn't light because the flattend primer cups were 0.014" below flush. After that occurred, I've paid closer attention to priming pressure, and I contoured my priming tool to make it a little concave, so it spreads the force over more of the Tulammo SPP's super-curved priming cup.
     
    Last edited: Aug 23, 2011
  7. jsnake

    jsnake Member

    Joined:
    Jun 11, 2009
    Messages:
    67
    Location:
    Christiansburg, VA
    Happy to report all went bang. My CZ85 Combat has a 15lb hammer spring and they still all went off. My G19 had no problems as well

    Average velocity with my standard 9mm load was within 2 - 4 fps. I think I will be buying a bunch in all sizes now ~25-30k.

    Anyone have experience with the 209 primers?

    Joe
     
  8. amlevin

    amlevin Member

    Joined:
    Jan 15, 2007
    Messages:
    826
    Location:
    NW Washington
    Wolf/Tula, same thing different color box.

    I've been using them several years not. Love their .223 primers. Don't see the need to buy CCI #41 primers at over twice the price yet the same performance and resistance to slam-fires.

    Only "Big Name" primers I buy now are Bench Rest. All my other ammo gets Tula or Wolf, depending on the stock at my online Dealer.
     
  9. Hondo 60
    • Contributing Member

    Hondo 60 Member

    Joined:
    Sep 6, 2009
    Messages:
    5,324
    Location:
    Manitowoc, WI
    Glad to read all of this!

    I'm about to order 5k SPP & was hoping Tulas would work.

    Thanks to all for posting!
     
  10. Sin City Shootist

    Sin City Shootist Member

    Joined:
    Dec 11, 2009
    Messages:
    299
    Location:
    Las Vegas Nevada
    Wolf/Tula is pretty much all I use now. Always go bang and cheap.
     
  11. oldreloader

    oldreloader Member

    Joined:
    Apr 24, 2009
    Messages:
    804
    Location:
    Magnolia AR
    I use both Tula SPP and Wolf LPP. I am well satisfied with them. Just be sure to seat the LPP FIRMLY.
     
  12. 191145acp

    191145acp member

    Joined:
    Aug 22, 2011
    Messages:
    5
    ive used wolf primers alot and never have had a prob with them
     
  13. jsnake

    jsnake Member

    Joined:
    Jun 11, 2009
    Messages:
    67
    Location:
    Christiansburg, VA
    I am glad others are having results similar to mine. With homebrew bullets, the cost savings is significant. More shooting for me. HA!
     
  14. oldreloader

    oldreloader Member

    Joined:
    Apr 24, 2009
    Messages:
    804
    Location:
    Magnolia AR
    That's right jsnake with Tula/Wolf primers and Missouri Bullets I can shoot LOTS more.
     
  15. jeeptim

    jeeptim Member

    Joined:
    Mar 27, 2010
    Messages:
    575
    Location:
    California
    The only thing i have found wrong with Tula primers they are not made in
    AMERICA
     
  16. greyling22

    greyling22 Member

    Joined:
    Aug 6, 2007
    Messages:
    4,340
    Location:
    East Texas
    they're a bit harder than most. My witness elite gets a light primer strike about 1 out of 50 on my 9mm. My 357's got bang every time in my lightened springs marlin 1894 and my smith 686 revolver. I keep meaning to buy a longer firing pin pr heavier spring for the witness. But they're so much cheaper than other brands that I don't know that I will ever buy anything else.
     
Thread Status:
Not open for further replies.

Share This Page