1. I made my own rendition of the Lee Classic loader. I made decapper punch from a piece of 3/8" hardwood dowel and 1" piece of 1/8" metal rod. A primer and wad setter from 3/8" x 5" piece of pvc pipe, and crimp starter using a 7/16" deep socket, and crimp punch from 3/8" bolt. However I've decided I prefer not to crimp, but use a card wad to seal the shot charge. A sharpie scribes the shot description on the card wad for easy ID. I've loaded 1/2 oz to 7/8 oz loads thusly. ( extrapolated reduced loads of powder- conservative on the light side. Patterns kill with lead... ). Favorite powders are #2400, H110, and H-Lil'Gun.