....I stopped gauge checking empty cases, as I did not find it to be advantageous. I do, however gauge check EVERY LOADED PISTOL ROUND. This is indeed advantageous...don't ask me how I know this.
The advantage to gauge checking empties is I don't waste primer, bullet and powder on a round that isn't going to fit in the first place. Is it economical? Maybe not. Just call me real frugal sometimes. (I have a touch of tartan in my bloodline.) I throw out about 1% of 9mm cases. Some would have worked, but why chance it.
I was scrolling down to say that. You beat me to it.And here I thought it stood for Benchrest Competition.
I should have mentioned...Lee Bulge Buster
The advantage to gauge checking empties is I don't waste primer, bullet and powder on a round that isn't going to fit in the first place. Is it economical? Maybe not. Just call me real frugal sometimes. (I have a touch of tartan in my bloodline.) I throw out about 1% of 9mm cases. Some would have worked, but why chance it.
I think once the web is bulged time to move on.
If one picks up a 380 case I would think it would be evident before plunking it into a 9mm case gauge
Just saying.
That is how I determine the next caliber to buy a gun for. If I tend to find enough brass from range pickup, I know I have a decent source of brass.I usually don't have the "380 in 9mm" problem 'cause I look at every case head after it comes out of the tumbler. But, save that 380 brass so you'll have a good excuse to get a 380 pistol (as if anyone needs a reason)...
Ya buddy, I also find any split cases that I missed there.The one in a thousand or so .380 case I miss before it gets to the 9MM sizer is felt then. Extremely hard to miss the difference in feel there.