Whats your favorite 9mm TiteGroup load withe Berry's 115grn plated

[kgpcr]

I have 8lbs of TiteGroup and 5k Berry's 115grn 9mm plated bullets. Whats your favorite 9mm TiteGroup load with Berry's 115 plated bullets? Thanks for your reply!

 

[Fine Figure of a Man]

Look here.
http://www.hodgdonreloading.com/

 

[lauderdale]

What gun are you shooting with them?

 

[Rule3]

I do not have one. Don't use either TG or Berrys.

What's "yours"

 

[LiveLife]

TiteGroup ... Berry's 115 grn 9mm plated bullets.

I have used lead load data with Berry's regular plated bullets with good results. Here's Hodgdon's lead load data - http://www.hodgdonreloading.com/data/pistol

115 gr Lead RN Titegroup COL 1.100" Start 3.9 gr (1,075 fps) 25,800 CUP - Max 4.3 gr (1,151 fps) 30,500 CUP

For Berry's 115 gr regular plated solid base RN, I would suggest 4.2 gr Titegroup and test OAL from 1.160" to 1.120" to see which OAL/COL will work with your barrel and produce greater accuracy.

Unless your barrel has short leade, my recommendation is using shorter 1.130"-1.135" for greater neck tension and .378" taper crimp to not cut into the copper plating and to not reduce bullet diameter.

Titegroup and Berry's plated bullets can produce accurate loads. Here's Berry's 124 gr regular plated solid base RN with 4.0 gr of Titegroup for 2"-3" groups at 25 yards - https://www.thehighroad.org/index.p...e-pistol-reloaders.746062/page-2#post-9382933

 

[rskent]

My “go to” for a while now has been: 9mm 115 plated (mostly Berry’s), 4.5gr Tightgroup, 1.135 OAL.

It runs well in everything I have.

I have had problems with it in a brand new Glock. After a while they seem to lighten up and run fine.