Winchester safe w/electronic keypad lock

[ROCKETBMM]

Can anyone help me, I let the darn paperwork blow away as I moved the safe home from Sam's Club. Now the safe door is open, I have no light on keypad. What next? Do I need a battery installed, if so how?? I have a fax if you can fax the info to me.
Thanks, for any assistance.

 

[a1abdj]

If your lock is a LaGard (LG) then the pad will slide upwards releasing it from the screws on the door.

If your lock is a S&G, then you should see a yellow tag hanging beneath the lock. Pull on this and the battery compartment should open up.

Both locks use 9 volt batteries and come factory set to 1 - 2 - 3 - 4 - 5 - 6. On the S&G you have to hit # after entering the combo.

 

[ROCKETBMM]

Great, I now have battery in and lock works well. It is an LG lock. Now, how do I put in my own combination?

 

[a1abdj]

0 - 0 - 0 - 0 - 0 - 0
Six Zeros Places Lock In Programming Mode

1 - 2 - 3 - 4 - 5 - 6
Enter Your Existing Combo

? - ? - ? - ? - ? -?
Enter New Six Digit Combo

? - ? - ? - ? - ? - ?
Repeat New Six Digit Combo


Do this with the door open, and make sure the lock operates properly before closing the door and using the safe.

 

[ROCKETBMM]

Thank you very much!! It works just fine now, you were a great help! Have a "Healthy and Prosperous New Year" !!!!!