Mulliga
Member
Well, I'm continuing the epic saga of the 9mm RAMI started in this thread.
http://www.thehighroad.org/showthread.php?t=150396&highlight=wringing+RAMI
I took the RAMI out yesterday along with my brand spanking new 642, a mini-review of which can be read here. I ran a total of 200 Wolf FMJs, 200 Blazer Aluminum FMJs, and 100 Magtech JHPs through it (not the best diet of rounds, but hey, this is supposed to be a challenge ). It became quite apparent, as Caliburn suggested, that one mag was feeding correctly and one was jamming a lot (not to mention I could only force 9 rounds in there).
It was educational shooting the snub next to the CZ. With the RAMI, recognizable 25 yard groups are doable, and even 50 yard shots land where you want them to. Rapid follow-up shots are simple, and reloads are fast. I really appreciate single-action autoloaders now. After the 200 Wolf FMJs, I stopped using the bad mag and started concentrating on the good one.
Unfortunately, the 175 rounds I fired through the snubby had taken their toll (not to mention loading 500 9mm rounds into those stiff and small RAMI mags). My hands were in bad shape. After 200 Blazers and 50 Magtechs with the good mag, I had a single fail-to-feed near the end of the day, but keep in mind that by this point the feedramp was very dirty and I was limpwristing/flinching badly, since I had blisters on my both my trigger finger and thumb and my hands were literally shaking from all the soreness.
The jury's still partially out, but I think I can trust my RAMI for now, as it passed the "200 round test" advocated by Preacherman and others even in the worst conditions (not so great ammo, shooter in bad shape, dirty). If you decide to buy one, make sure to test it thoroughly before you carry it, of course. As an aside, the grip screw worked itself out from the recoil (that's how bad I was limpwristing) and I lost it at the range, so I called Mike at CZ up this morning and he's sending a new one. He recommended using a thread-locker to keep them in.
K&D Holster Review
Today I picked up the K&D IWB Belt Defender I ordered for the RAMI (took about a month, which is not too bad).
It's a nice holster - on par with my HBE IWB I ordered last year.
The finish is shiny and new, and the holster has the typical stiffness of new leather. Retention is okay but not spectacular, but this is not critical for this type of holster, and I suspect the RAMI's shallow ejection port is much of the cause, as well. I sort of wish that the holster had a higher back like my HBE rig to protect the safety, but I'm sure you can get this as an option, and the safety on the RAMI is so slim that it's no big deal anyway.
The clips (My preference is for the over the belt style, but the J clips are less bulky) are quite adjustable so you can set your ride height at whatever you like. I'm going to try it as is for now - it rides slightly higher than I'd like but it still feels fine. The holster snaps onto my Wilderness Instructor's Belt with no problems.
The holster is of the smooth-side out, rough side in design. The HBE holster is the opposite. Frankly, the HBE holster looks worse, but works better. The rough material grabs on clothing (specifically your pants/shorts and your briefs/boxers) and helps the holster stay put when you draw. The K&D rig moves around a bit more, and is flatter and somewhat wider at the belt, making it less contoured to fit at the 4 o clock position, at least for my body. It's still a fine holster, but keep this stuff in mind when you order.
http://www.thehighroad.org/showthread.php?t=150396&highlight=wringing+RAMI
I took the RAMI out yesterday along with my brand spanking new 642, a mini-review of which can be read here. I ran a total of 200 Wolf FMJs, 200 Blazer Aluminum FMJs, and 100 Magtech JHPs through it (not the best diet of rounds, but hey, this is supposed to be a challenge ). It became quite apparent, as Caliburn suggested, that one mag was feeding correctly and one was jamming a lot (not to mention I could only force 9 rounds in there).
It was educational shooting the snub next to the CZ. With the RAMI, recognizable 25 yard groups are doable, and even 50 yard shots land where you want them to. Rapid follow-up shots are simple, and reloads are fast. I really appreciate single-action autoloaders now. After the 200 Wolf FMJs, I stopped using the bad mag and started concentrating on the good one.
Unfortunately, the 175 rounds I fired through the snubby had taken their toll (not to mention loading 500 9mm rounds into those stiff and small RAMI mags). My hands were in bad shape. After 200 Blazers and 50 Magtechs with the good mag, I had a single fail-to-feed near the end of the day, but keep in mind that by this point the feedramp was very dirty and I was limpwristing/flinching badly, since I had blisters on my both my trigger finger and thumb and my hands were literally shaking from all the soreness.
The jury's still partially out, but I think I can trust my RAMI for now, as it passed the "200 round test" advocated by Preacherman and others even in the worst conditions (not so great ammo, shooter in bad shape, dirty). If you decide to buy one, make sure to test it thoroughly before you carry it, of course. As an aside, the grip screw worked itself out from the recoil (that's how bad I was limpwristing) and I lost it at the range, so I called Mike at CZ up this morning and he's sending a new one. He recommended using a thread-locker to keep them in.
K&D Holster Review
Today I picked up the K&D IWB Belt Defender I ordered for the RAMI (took about a month, which is not too bad).
It's a nice holster - on par with my HBE IWB I ordered last year.
The finish is shiny and new, and the holster has the typical stiffness of new leather. Retention is okay but not spectacular, but this is not critical for this type of holster, and I suspect the RAMI's shallow ejection port is much of the cause, as well. I sort of wish that the holster had a higher back like my HBE rig to protect the safety, but I'm sure you can get this as an option, and the safety on the RAMI is so slim that it's no big deal anyway.
The clips (My preference is for the over the belt style, but the J clips are less bulky) are quite adjustable so you can set your ride height at whatever you like. I'm going to try it as is for now - it rides slightly higher than I'd like but it still feels fine. The holster snaps onto my Wilderness Instructor's Belt with no problems.
The holster is of the smooth-side out, rough side in design. The HBE holster is the opposite. Frankly, the HBE holster looks worse, but works better. The rough material grabs on clothing (specifically your pants/shorts and your briefs/boxers) and helps the holster stay put when you draw. The K&D rig moves around a bit more, and is flatter and somewhat wider at the belt, making it less contoured to fit at the 4 o clock position, at least for my body. It's still a fine holster, but keep this stuff in mind when you order.