WST in 9mm

[Madpap]

Does anyone use WST in 9mm? I use it in .40 and .45 with great results but can't find any data on 9mm.

 

[LiveLife]

There is no current published load data for WST and 9mm from Hodgdon nor in older 1999-2005 load data from Winchester. Interestingly as you posted, there are plenty of WST load data for 40S&W and 45ACP in current/older load data from Hodgdon/Winchester. Lyman #49 only shows WST load data for 45ACP. Perhaps Winchester/Hodgdon could not get consistent enough pressures/accuracy from WST for 9mm compared to other powders.

Perhaps this may help (But use unpublished load data at your own risk!) - http://www.brianenos.com/forums/index.php?showtopic=144946&#entry1626833

More links with chrono data:

http://www.brianenos.com/forums/index.php?showtopic=111615

http://www.thehighroad.org/showthread.php?t=493588

http://www.brianenos.com/forums/index.php?showtopic=69725

 

[Madpap]

Thanks for the link. Looks like I need to use something else. N320 looks worth a try.

 

[LiveLife]

FYI, N320 is cut extruded powder. Many match shooters like it for higher velocities it can achieve while being cleaner burning than most.

 

[RustyFN]

I use WST in 9mm. There is load data in the Hornady manual.

 

[Madpap]

Thanks for the help guys.