Zastava M70 Sporting Rifle

Status
Not open for further replies.
Here's one I've only seen a few examples pop up for sale: 20" barrel full (Mannlicher) stock chambered for the .375 H&H Magnum cartridge. This one is an Interarms Mark X but I've seen this combo in ZCZ Zastava marked receiver as well.

https://www.gunbroker.com/item/859538461

Out of my personal recoil exposure league!
 
Great looking rifle. Do you know when you are going to get a chance to fire it?
Probably on Monday. I am curious to see how it sights in. One screw on the rear sight, elevation screw, is buggered and will need to be replaced.
 
You know it is time to stop acquiring firearms when you can’t fit all of them in the safe.
That's never stopped me, but to each his own.:)

Post up a range report including how that Bavarian style stock works out for you.

You know it is time to stop acquiring firearms when you can’t fit all of them in the safe.

I haven't oiled any stocks on the rifles I've purchased with oil finished stocks yet. Most of mine have a polymer urethane finish. After studying some THR threads I think I'll give this stuff a try.

http://www.natchezsolution.com
 
Last edited:
Anybody know the twist rate on the 270 Win bbl?

Yep.

1:10 inches rifling twist for factory Zastava. 270 Winchester rifle barrels.

How about ideas fo a good leather sling for this rifle.
I got away from leather slings and such after I lived in Southeast Louisiana, and was there for Hurricanes Katrina & Gustav. Synthetic materials are less susceptible to problems brought on through weather and climatic conditions.

BTW, the rear sight on that rifle can be folded down if you weren't aware.
 
Last edited:
Since I quit using two piece bases I use EGW as my first choice. If I can’t get what I need from EGW which has not happened yet I’ll look to Warne. If Warne was the same price I’d just go with them.

My shoulder doesn’t get along with hogback stocks.
 
Range Report.

I am pleased with this rifle. It shoots very well. The hogback stock works for me.
Yesterday I measured the trigger pull with my Lyman gauge. I was getting about 4.5 lbs.
I slapped some Tung oil on the stock. It looks better now.
Shot about 10 rounds at the indoor range. I can get 100 yards there. It looked almost perfect for a 200 yard zero. Maybe a bit high. With my old eyes, it is not exact. The windage was good from the factory.
Shot some in my Lead Sled and some standing offhand. Fun to shoot offhand with it.
Came home and made a small adjustment to the sight to bring the group lower by a tiny bit. It is probably a perfect 200 yard zero now. Close enough.
Took the bbl action off and adjusted the trigger. I did not measure yet but it is improved and probably about 3.5 lbs now.
What a great rifle.
 
Although .270 Winchester isn't a relatively hard kicking round I've come to appreciate recoil minimization where practical. So I'd go with a Pachmeyer Decelerator or Limbsaver Airtech.

Another option would be to install a Zastava or Interarms buttplate found secondhand on eBay or maybe Gunbroker, and use a slip-on recoil pad such as the Limbsaver Airtech when you take it to go shooting. No constant compression force on the recoil pad if stored muzzle up that way. And if the slip-on pad wears out, no cost and labor fitting a new one directly to the rifle's butt stock.

https://limbsaver.com/products/airtech-slip-on-recoil-pad

https://www.ebay.com/itm/254471225034
 
Last edited:
The last Zastava I had I had to completely refinish. It was a 22 that it looked as if they had forgotten to apply finish after they stained it. I would drop the hammer on a Mark X over the newer guns.
 
Well I decided since I was looking to replace the dried out original recoil pad that I would just order a new Bell and Carlson composite stock fully aluminum bedded.
 
Well I decided since I was looking to replace the dried out original recoil pad that I would just order a new Bell and Carlson composite stock fully aluminum bedded.
I suppose that means you won't be using a "pig back" style stock going forward, although I haven't honestly looked at B&C synthetic stocks.

I have purchased a few Interarms Mark X stocks in non-"pig back" style (Monte Carlo and American) to replace the "pig bag" stocks on some of my 2019 Zastava M70 pre-owned rifle purchases, planning to then sell the surplus "pig back" stocks. I somewhat doubt if the recoil pads on any of the then-surplus "pig back" stocks would have recoil pads in considerably better elastic condition than the one on your rifle though.
 
Status
Not open for further replies.
Back
Top