The RUGER OLD ARMY Club

Found this group while hunting for scope mount for my ROA. I'd like to sign up.

I sold this to my brother many years ago, but he's now not legally allowed to play with things that go bang. He gave it back to me, but it was in pieces and in pretty rough shape. I sent it to Ruger for refinishing and they lost it in their facility until I called and reminded them that they had it. I was expecting a $130 bill but instead UPS showed up at the door with my ROA looking like new.

I still haven't found the scope mount. Does anyone here know if a Blackhawk mount will work?
 

Attachments

  • IMG_0004.jpg
    IMG_0004.jpg
    38 KB · Views: 67
I'm looking to replace the nipples on my Old Army as a couple of nipples allowed Rem #11's to slip and CCI #11's to need striking twice to set off.

I wanted to find some that still used the Ruger hex head and found some by Track of The Wolf that sell for $4 ea (SS) vs nearly $6 for others. He stated they were built with the exterior dimensions of the Ruger and interior dimensions of the Treso's.

I was told that Blomquist also makes replacement nipples that use the hex head wrench, but I've been unable to find any info. I sent him an e-mail. I hear he also has some hex head nipples that replace those on Pietta's as well, which would be perfect.

My LGS only sells CCI #11 magnums, and it's the only place close to me that sells 777 so I'd like for them to work with CCI's.

I went through a lot of trouble finding a 3/16 nut driver and would like to not need a new wrench too.

I've used up a lot of David's time with many questions and am a bit antsy and am nearly ready to finish the payment info, but I feel I ought to give Blomquist a fair shake. I'm not known for my patience though!

I would like to know from people that have used these what they thought about them. Uniformity? The fit of caps or lack of?

Anybody here familiar with either of these?
 
esims: That's great that they were able to find your pistol and do a good job on it all on their dime!

Wish I could help with the scope ring question...
 
I still haven't found the scope mount. Does anyone here know if a Blackhawk mount will work?
Click to expand...


It's been a while since i D&T'd a Blackhawk, or even had one in my hands.
But i do believe that the top straps on both the BH and the ROA are the same.
With the exception of a 1972 ROA that has the Ruger flat top design.
 
I own both a ROA and a Super Blackhawk, and a Weaver scope mount for the SBH. I just took some measurements and the SBH scope mount definitely will NOT work on a ROA. The ROA frame measures approx. 3.6 inches along the top strap and the SBH only measures 2.7 inches.
 
ROA Club Members:

01. ClemBert 02. Eights 03. kanook 04. [email protected] 05. mykeal
06. adaptandovercome 07. 461 08. junkman_01 09. lonewolf5347 10. rcflint
11. MCgunner 12.madcratebuilder 13. AbitNutz 14. eastbank 15. robert garner
16. philuk44 17. HUnter58 18. arcticap 19. BullRunBear 20. theotherwaldo
21. SC Slowhand 22. Prairie Dawg 23. wittzo 24. Tallbald 25. Smokin_Gun
26. OB One 27. jungle 28. plumbernater 29. daveinvegas 30. JanZ
31. George Mabry 32. Benmathes 33. Loosenock 34. higene 35. Rock Island
36. Erich 37. robhof 38. J-Bar 39. Nomad, 2nd 40. TAURUSBOB
41. martindl99 42. Vermonter 43. wasatch 44. fogg64 45. BConklin
46. Howdy Doody 47. bushrod2 48. rdstrain49 49. FirinFlatTop 50. rem1858
51. straight-shooter 52. edorfox 53. KevininPa 54. Ringo1234 55. pohill
56. The Don 57. jeepcoma 58. Dave Markowitz 59. Chazz 60. andrewstorm
61. Steel Wheels 62. Legionnaire 63. NineMilePete 64. 94RUGER 65. Acorn Mush
66. R.Ganister 67. Boom-stick 68. Buddy 69. Ghost Dog 70. BML
71. Cult of 1858 72. Jaymo 73. bigbore442001 74. Engineer Bill 75. azyogi
76. Dr. Leaky 77. Clermont 78. Indy4570 79. ozarkguy 80. Plastikosmd
81. mrdo1 82. bax504 83. Constrictor 84. BC Mosaic 85. clepidus
86. did 87. gunboat57 88. Malachi Leviticus Blue 89. Blue Hill 90. Power Keg
91. SUMIKITO 92. ChasMack 93. Larry Flett 94. RugerShawn 95. tdperry
96. Rettech 97. renoman 98. tk1971 99. Curator 100. Dan Carey
101. Old No7 102. Muddydogs 103. Oldnamvet 104. 6.5x55swedish 105. crazysccrmd
106. Jim, West PA 107. rodwha 108. Varmiter 109. Indian Outlaw 110. Patocazador
111. Fingers McGee 112. h0use 113. Huntingsaddles 114. GregP42 115. esims

Welcome GregP42 and esims! :D:D:D
 
No secret Clem. As far as i'm concerend,the price was ok. $300 OTD.
Not the rediculous prices i see these sellin for nowadays.
I'd o' rather given $250 tho.
 
new member

Good to be here! Pictures are worth thousands of words...so here goes ~
 

Attachments

  • IMG_0687a.jpg
    IMG_0687a.jpg
    54.3 KB · Views: 82
  • IMG_0689a.jpg
    IMG_0689a.jpg
    63 KB · Views: 93
  • IMG_0690a.jpg
    IMG_0690a.jpg
    59 KB · Views: 77
Thanks Jim, West PA! Ram lever on that smooth-top was a distorted casting. Replaced it w/stainless lever from "Midway". T'was what they had in stock. They carry alota ROA parts. Here's more evidence of my sickness.
 

Attachments

  • IMG_0052a.jpg
    IMG_0052a.jpg
    38.3 KB · Views: 101
  • IMG_0051a.jpg
    IMG_0051a.jpg
    55.2 KB · Views: 90
  • IMG_0049a.jpg
    IMG_0049a.jpg
    42.2 KB · Views: 86
  • IMG_0047a.jpg
    IMG_0047a.jpg
    59.7 KB · Views: 98
OK...so here we go...
robhof & fogg64 ~
Sorry, fogg64, about the bad tip on parts at Midway! Last time I was there online (been a year) I bought several cylinder latch's, hammer struts, latch springs, pawl plunger springs, & cylinder pivot (base) pins. Nuts! Very disappointing! I think that's Wilson's Law. When you find a source for what you want, they discontinue it!

robhof, I'm old & I've almost learned some things. The best I can do is pretend to be a machinist:-D I made spec drawings for the whole mess, along w/text proceedures for all of it. Had to...too much to remember. I'll scan the drawings asap and post them and the texts if anyone is interested in making their own, or knows someone locally who can do the work. Wouldn't attempt it w/out a lathe & milling machine.

fogg64, yes, I confess...I made 'em. And there's no treatment for this sickness! Loading is a bit more time consuming. I made some tools that help speed up the process. The performance, though, is far beyond the hopeful results I'd conjured up in my pea brain. There's alot more to share on this topic. More pics and proceedures, grip frame changes, and action improvements. Again, if anyone is interested.

I will say this...so long as there are small pistol primers, I'm done w/caps.

Thanks Yous Guys, for responding to my posts. This is the first time I've put this stuff up for review.

Kindest Regards
Doak
 
robhof

Anything that improves the ROA is always welcome, just look at the number of hits on the many ROA videos on Youtube. We all would be very grateful for any advice, or improvements to these great guns.
 
OK Here's the spec drawings. Prolly gonna hafta post 'em in sets of 4?
 

Attachments

  • Assembled View.PDF
    1.1 MB · Views: 145
  • Body Specs In.PDF
    1.1 MB · Views: 68
  • Body Specs Out.PDF
    1.1 MB · Views: 61
  • Capsule Body.PDF
    1.1 MB · Views: 64
Here's next set.
 

Attachments

  • Driver Blanks.PDF
    1.1 MB · Views: 50
  • Firing Pin Plug.PDF
    1.1 MB · Views: 52
  • Firing Pin.PDF
    1.1 MB · Views: 47
  • Inner Tip.PDF
    1.1 MB · Views: 48
You must log in or register to reply here.

Similar threads

BP Hunter
  • Locked
Ruger Old Army grip
Replies
7
Views
2K
BP Hunter
BP Hunter
A
  • Locked
ruger old army buffalo bone grip with mother of pearl inlay
Replies
9
Views
1K
dickydalton
dickydalton
G
  • Locked
fffg VS ffffg
Replies
17
Views
3K
gmaster805
G
A
  • Locked
Ruger Old Army
Replies
5
Views
878
ruger357
R
W
  • Locked
Ruger Old Army
Replies
12
Views
2K
rem700nut
R
Back
Top