**Brian19**
Member
- Joined
- Jan 30, 2021
- Messages
- 94
Damaged my Kriss Vector today. Here the details:
180 gr RMR FMJ
8.8 grains of Longshot
Brass on its 3x firing
Upon making the round, or sizing the brass, it did not plunk due to bulge. It was then run through the Lee bulge buster, loaded and passed a plunk test.
Bullet exited the barrel.
I’ve always been suspect of running bulged brass through the bulge buster and I’m thinking this the root cause resulting in case head separation.
180 gr RMR FMJ
8.8 grains of Longshot
Brass on its 3x firing
Upon making the round, or sizing the brass, it did not plunk due to bulge. It was then run through the Lee bulge buster, loaded and passed a plunk test.
Bullet exited the barrel.
I’ve always been suspect of running bulged brass through the bulge buster and I’m thinking this the root cause resulting in case head separation.