10mm platform, which and why?
- Thread starter beeenbag
- Start date
- Status
Whiskeyhotel2020
Member
I have a Kimber TLE. And love it. I'm biased when it come to the 1911/Glock question. It is a tough choice and ultimately comes down to which do you see most in your mind when you picture yourself performing the various tasks on your list?
Necessary_Nutrient
Member
Came here to report this. I wish I had held out for an OSP, but the 5.25 inch XDm 10 that I have is, in my opinion, my best Semi-Auto Pistol and this is a collection that includes G19/G22, P320's, Sig P227 and USP 40 and 40C. The USP's are very close, I don't think they have quite the accuracy although barrel length and types of sights is certainly a factor.
I love the 15 round magazines, the quality sights, great ergos, the thing is reliable as a rock and I believe the "Match" stamped on the barrel with my 25 yard accuracy results. So far, I only really shoot 650+ Ft Lb ammo since I bought this thing to be a bruiser and it loves it, actually manages to be manageable if a bit loud with top power pistol loads. I'll never sell the 5.25, will probably pick up another OSP version in 10 or .45 (or both) someday.
tommy.duncan
Member
Yes, Lots of love here, I have the match champion and the 3" Talo.
BreechFace
Member
- Joined
- Mar 2, 2020
- Messages
- 3,511
G40 and if you reload and want to avoid the Glock Smilee get a Lone Wolf barrel.
AFSG
Member
- Joined
- May 16, 2020
- Messages
- 70
10mm is a great woods caliber if you reload. I have been very disappointed with off the shelf loads. Buffalo being the only exception it's great stuff. Most off the shelf feels more like 40 S&W. I bought a Delta Elite in the early 90's it was good while it lasted but the 1911 style frame took a real beating under the 10. Today I'm happy with a Glock and if I wanted a really built 10 I would put one together from the ground up.
.455_Hunter
Member
I am fond of the 1006 and 1066, but they are almost 30 years out of print.
CaptHank
Member
Paul Toms
Member
^^ That's pretty sexy, right there! ^^
tommy.duncan
Member
You need to look into the Underwood offerings. Just as hot and half the price.
'
I have a 1076 that I really like, it is a great shooter!!
Necessary_Nutrient
Member
In addition to the Springfield XDm-10 in 5.25, I have a Ruger Blackhawk convertible with .40/10MM cylinders and I really like it. The XDm-10 seems more accurate but the 6.5" barrel on the RBH has managed 1500 Fps with a near max load of Power pistol and a 155 grain Sierra TMJ bullet which is a nice, fat 775 ft/lbs! I'd love a GP100 in 10MM but the Single Action Black Hawk is fine for the kind of target shooting I do, although to date the XDm has been more accurate.
Welcome to the world of XDm-10. Best looking, best shooting, big fat magazines
The factory sights with the fiber insert are all metal and excellent, I think you'll be happy when you get it to the range.
Last edited:
I love my TRP in 10mm but seeing the XDM I am getting a real bad itch to buy one. I do not think hydrocortisone cream will take care of this itch. I'll need to buy another safe as well, problems, problems, problems ....sigh!In addition to the Springfield XDm-10 in 5.25, I have a Ruger Blackhawk convertible with .40/10MM cylinders and I really like it. The XDm-10 seems more accurate but the 6.5" barrel on the RBH has managed 1500 Fps with a near max load of Power pistol and a 155 grain Sierra TMJ bullet which is a nice, fat 775 ft/lbs! I'd love a GP100 in 10MM but the Single Action Black Hawk is fine for the kind of target shooting I do, although to date the XDm has been more accurate.
Welcome to the world of XDm-10. Best looking, best shooting, big fat magazines
The factory sights with the fiber insert are all metal and excellent, I think you'll be happy when you get it to the range.
Lennyjoe
Member
I dumped the XDM and went back to the G20. Just didn’t get to likening the XDM and accuracy was not as good as my last G20 was. So, I sold it and picked up a Gen 4 G20 under the Blue Label program. Took the extra money I saved under the Blue Label program and purchased a KKM barrel for increased accuracy and better chamber support for longer brass life
AFSG
Member
- Joined
- May 16, 2020
- Messages
- 70
I had Underwood on my mind I guess my fingers forgot to add it. Underwood is excellent choice.
Necessary_Nutrient
Member
No, only an XDm or 3 will scratch that one
They look better in person and the factory barrel and sights can be left on!
mljdeckard
Member
I am planning to build a Polymer 80 G20. For a couple of reasons. The Polymer 80 frames have a less rakish angle on the grip than a regular Glock. And SO I HAVE BEEN TOLD, a Glock is better at running full-house or 10mm lite loads without having to tweak it.
Last edited:
Zaydok Allen
Member
- Joined
- Feb 12, 2011
- Messages
- 13,274
I may still pick one of those up. the capacity is nice.In addition to the Springfield XDm-10 in 5.25, I have a Ruger Blackhawk convertible with .40/10MM cylinders and I really like it. The XDm-10 seems more accurate but the 6.5" barrel on the RBH has managed 1500 Fps with a near max load of Power pistol and a 155 grain Sierra TMJ bullet which is a nice, fat 775 ft/lbs! I'd love a GP100 in 10MM but the Single Action Black Hawk is fine for the kind of target shooting I do, although to date the XDm has been more accurate.
Welcome to the world of XDm-10. Best looking, best shooting, big fat magazines
The factory sights with the fiber insert are all metal and excellent, I think you'll be happy when you get it to the range.
Necessary_Nutrient
Member
Yes, I recommend handling one if you get a chance as they look even better in person. They used to run good sales prices on the 4.5" XDm-10 although an OSP or 5.25 with the adjustable Metal sights is always a plus and still competitive with the other major offering. I've been seeing good prices on the .45 ACP version of the 5.25 and I really, really want one.
Here's my 4.5 inch .40, I shoot this one with full power reloads a lot it's significantly more accurate than my G22 and the brass comes out in excellent shape.
Attachments
Last edited:
spraay
Member
I can't Glock (never liked how they feel in the hand) and I really like 1911s, so I got a Colt Delta Elite.
- Status
