Most load roughly the same within brands there. If the federal hulls are plastic, have a plated steel head and paper basewad, they’re all the same internally even if they’re Top Gun, Hi-Power, or Field. Don’t expect the, to last long, primer pockets loosen up quickly with those cases. I like them for 1 oz field loads though.
Same with rem hulls. The unibody hulls are generally the same until you get back to the old RXP and earlier, and even then, the differences may not be big (Im not near my manuals so I can’t verify that). Steel vs brass heads are the biggest difference. There are some other types to watch for with plastic basewads.
Winchester hulls are the odd ones with the newer poly formed hulls designed to use the same loads as the older unibodies (at least according to Lyman 5ed).
A big thing to look at if mixing these internally similar hulls is that some versions use 6pt and others 8pt crimps. Sorting these is best done before they reach the sizing die. I’ve made that mistake before, they may close but it’s not pretty. Although the newer zinc head Winchester hulls it probably doesn’t matter since they crimp equally badly even if you do everything right.