dc.fireman
Member
So - I've recently bought a lb. of Unique to try out on my .45ACP loads. The gun store guy knows I load for my 30-30, and mentioned it works well in this also. I've looked across the interwebs, and can only come up with one instance where someone was using my components:
WW 2x brass
Sierra 150gr. RN w/cannelure
Unique - the varying loads are saying between 8.0-10.0 gr.
WLR primers ( I also have Rem. 9.5's, and CCI LR Magnums, if I need them)
I'm planning on using this in my M94 Trapper, and my Marlin 1936 for plinking loads...
Lots of info for cast bullets - only one I could find for jacketed. Has anyone used this before? Where'd you start? Should I use the standard 2.550" COL?
I've been to the Alliant site, and checked their data - nothing for pistol powders in a 30-30...
Any ideas? Any loads you've used?
WW 2x brass
Sierra 150gr. RN w/cannelure
Unique - the varying loads are saying between 8.0-10.0 gr.
WLR primers ( I also have Rem. 9.5's, and CCI LR Magnums, if I need them)
I'm planning on using this in my M94 Trapper, and my Marlin 1936 for plinking loads...
Lots of info for cast bullets - only one I could find for jacketed. Has anyone used this before? Where'd you start? Should I use the standard 2.550" COL?
I've been to the Alliant site, and checked their data - nothing for pistol powders in a 30-30...
Any ideas? Any loads you've used?