vanfunk
Member
That the military had chosen 5.56mm for a combat round due to the fact that it was more likely to wound rather than kill.
Nope. Totally, completely and irretrievably debunked.
vanfunk
That the military had chosen 5.56mm for a combat round due to the fact that it was more likely to wound rather than kill.
Round-nose bullets seem to work well for the military...
Some elite LE units load them as a first round in their mags to defeat auto glass!
after having killed or injured several bystanders even in a legal shooting, You would be TOAST !!
About the only use for hardball in 45 acp. is punching paper
No handgun round will give you a 100% guaranteed 1 shot stop.
§ 9.05. RECKLESS INJURY OF INNOCENT THIRD PERSON. Even
though an actor is justified under this chapter in threatening or
using force or deadly force against another, if in doing so he also
recklessly injures or kills an innocent third person, the
justification afforded by this chapter is unavailable in a
prosecution for the reckless injury or killing of the innocent
third person.
Unfortunately, lawyers have it "both ways"!...There was a picture in a recent gun rag of the latest SD rd, IIRC, off the Ranger Series...It's effect after stoppage was the "ugliest 5-headed harpoon" you'd never want to see in your innards...Now a lawyer is going to ask: "What was your intent against my paralyzed "perp"?"Lawyers are just waiting to show concealed handgun owners as dimwits.
Yes, that can happen. But more often they expand. Why choose a round you know will not expand when you could use a round that probably will?How are hollow points more effective if you have to shoot someone wearing clothing wouldnt that foul up the cavity of the bullet and essentially make the bullet the same as a full metal jacket?
::sigh::the military had chosen 5.56mm for a combat round due to the fact that it was more likely to wound rather than kill.
DocGKR said:When comparing well designed duty handgun ammunition, there are minimal differences in penetration depths and temporary cavity effects, as noted below in the gel shots by Doug Carr:
As you increase bullet size and mass from 9 mm/357 Sig, to .40 S&W, to .45 ACP, more tissue is crushed, resulting in a larger permanent cavity. In addition, the larger bullets often offer better performance through intermediate barriers. For some, the incremental advantages of the larger calibers are offset by weapon platform characteristics. As is quite obvious from the photo above, NONE of the common service pistol calibers generate temporary cavities of sufficient magnitude to cause significant tissue damage. Anyone interested in this topic should read and periodically re-read, “Handgun Wounding Factors and Effectiveness” by Urey Patrick of the FBI FTU, as this remains the single best discussion of the wound ballistic requirements of handguns used for self-defense -- it is available at: [B]http://www.firearmstactical.com/hwfe.htm[/B] .
Keeping in mind that handguns generally offer poor incapacitation potential, bullets with effective terminal performance are available in all of the most commonly used duty pistol calibers—pick the one that you shoot most accurately, that is most reliable in the type of pistol you choose, and best suits you likely engagement scenarios.
The following loads all demonstrate outstanding terminal performance and can be considered acceptable for duty/self-defense use:
9 mm:
Barnes XPB 105 & 115 gr JHP (copper bullet)
Federal Tactical 124 gr JHP (LE9T1)
Speer Gold Dot 124 gr +P JHP
Winchester Ranger-T 124 gr +P JHP (RA9124TP)
Winchester Partition Gold 124 gr JHP (RA91P)
Winchester Ranger-T 127 gr +P+ JHP (RA9TA)
Federal Tactical 135 gr +P JHP (LE9T5)
Federal HST 147 gr JHP (P9HST2)
Remington Golden Saber 147 gr JHP (GS9MMC)
Speer Gold Dot 147 gr JHP
Winchester Ranger-T 147 gr JHP (RA9T)
Winchester 147 gr bonded JHP (Q4364)
.40 S&W:
Barnes XPB 140 & 155 gr JHP (copper bullet)
Speer Gold Dot 155 gr JHP
Federal Tactical 165 gr JHP (LE40T3)
Winchester Ranger-T 165 gr JHP (RA40TA)
Winchester Partition Gold 165 gr JHP (RA401P)
Federal HST 180 gr JHP (P40HST1)
Federal Tactical 180 gr JHP (LE40T1)
Remington Golden Saber 180 gr JHP (GS40SWB)
Speer Gold Dot 180 gr JHP
Winchester Ranger-T 180 gr JHP (RA40T)
Winchester 180 gr bonded JHP (Q4355)
.45 ACP:
Barnes XPB 185 gr JHP (copper bullet)
Federal HST 230 gr +P JHP (P45HST1)
Federal Tactical 230 gr JHP (LE45T1)
Speer Gold Dot 230 gr JHP
Winchester Ranger-T 230 gr JHP (RA45T)
Winchester Ranger-T 230 gr +P JHP (RA45TP)
Notes:
-- Obviously, clone loads using the same bullet at the same velocity work equally well (ie. Black Hills ammo using Gold Dot bullets, Corbon loads using Barnes XPB bullets, etc…)
-- Bullet designs like the Silver Tip, Hydra-Shok, and Black Talon were state of the art 10 or 15 years ago. Modern ammunition which has been designed for robust expansion against clothing and intermediate barriers is significantly superior to the older designs. The bullets in the Federal Classic and Hydrashok line are outperformed by other ATK products such as the Federal Tactical and HST, as well as the Speer Gold Dot; likewise Winchester Ranger Talons are far superior to the old Black Talons or civilian SXT's.
----------------------------------------
Basically all the standard service calibers work when fed good quality ammunition. The platform picked tends to dictate the caliber. For example, Glocks and Sigs tend to run best in 9 mm; the S&W M&P is the first .40 S&W pistol that seems to offer an ideal ergonomic and shooter friendly package; while a properly customized 5" steel-frame single-stack 1911 in .45 ACP is a superb, unparalleled choice for the dedicated user willing to spend a significant amount of money to get it properly initially set-up and considerable time to maintain it. For folks who want a .45 ACP pistol, but don't want to invest the funds and effort into getting a good 1911, they would be better served with a S&W .45 ACP M&P, HK45, S&W 4566, or possibly the SA .45 ACP XD.
Whatever you choose, make sure you fire at least 500 and preferably 1000 failure free shots through your pistol prior to using it for duty. If your pistol cannot fire at least 1000 consecutive shots without a malfunction, something is wrong and it is not suitable for duty/self-defense use.
------------------------------------------
The keys are:
-- Cultivate a warrior mindset
-- Invest in competent, thorough initial training and then maintain skills with regular ongoing practice
-- Acquire a reliable and durable weapon system
-- Purchase a consistent, robust performing duty/self-defense load in sufficient quantities (at least 1000 rounds) then STOP worrying about the nuances of handgun ammunition terminal performance.