https://www.berrysmfg.com/faq
Where can I find load data for your bullets?
Load data from any load manual or website can be used. Full-metal jacketed, lead bullet, or plated bullet load data can be used as long as the following standards are adhered to:
- The data contains the correct grain weight of bullet.
- Berry's max recommended velocity is not exceeded. (This info is displayed on bullet boxes and product webpages.)
- Standard Plate Bullets Max Velocity: 1,250 fps.
- Thick-Plate Bullets (TP) Max Velocity: 1,500 fps.
- Do not over-crimp the bullet. Crimping so tight that bullet deformation occurs, or plating is separated causing visible exposure of the lead core will cause tumbling, key-holing, and reduced accuracy.
Load data containing bullet descriptions such as Plated (P,) Berry's Bullet (BERB,) Total Metal Jacket (TMJ,) Copper Plated (CP,) or CPJ (Copper Plated Jacket,) refers to plated bullet data.
Cartridge Overall Lengths (COL) are found in the load data being used. DO NOT EXCEED SAAMI MAX COL SPECS.
For SAAMI MAX COL specs please click
HERE.
Here are websites with load data information:
http://www.hodgdonreloading.com/
http://www.accuratepowder.com/load-data/
http://www.alliantpowder.com/reloaders/default.aspx
Buyers and users assume all risk, responsibility and liability whatsoever for any and all injuries (including death), losses or damages to persons or property (including consequential damages), arising from the use of any product or data, whether or not occasioned by seller’s negligence or based on strict liability or principles of indemnity or contribution. It is the buyer's responsibility to educate themselves in safety standards associated with handloading ammunition.
Order Instructions
Shipping to Alaska or Hawaii
What is the difference between Plated/Jacketed/Cast bullets?
Why is the bullet diameter 0.001" bigger than my load book recommends?
Taper or Roll Crimp?
How fast can I shoot these bullets?
What does Double Struck (DS) mean?
Can I shoot your plated bullets in my Glock?
How thick is the "jacket" on your bullets?
Is separation a problem with Plated Bullets?
Why is there no cannelure in your bullets?
How do I get set up as a Dealer or Distributor of Berry's Mfg products?
Do you have a Digital Copy of your Catalog available?
Does Berry's Mfg offer an OEM program to ammunition manufacturers?
Do you sell internationally?
What is the brinell hardness of your bullets?