I need some feedback. I am reloading for my wife's Glock 17. I have a Lone Wolf Barrel so I can use cast lead bullets.
However, the attached photo is of a cartridge that I shot using Hornady 124g XTP with CCI 500 primers and 4.6 grains of Titegroup. Note that the primer imprinted on the bolt face. Is this a sign of over-pressure, poor headspacing or what?
OAL is 1.120" with the COL of 0.753" to 0.754". The cartridge is taper crimped with a Lee Factory Crimp.
I have never attached a photo before but will see if this works.
Vacek
However, the attached photo is of a cartridge that I shot using Hornady 124g XTP with CCI 500 primers and 4.6 grains of Titegroup. Note that the primer imprinted on the bolt face. Is this a sign of over-pressure, poor headspacing or what?
OAL is 1.120" with the COL of 0.753" to 0.754". The cartridge is taper crimped with a Lee Factory Crimp.
I have never attached a photo before but will see if this works.
Vacek