Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Beretta Tomcat Barrel Spring Replacement

Discussion in 'Gunsmithing and Repairs' started by Dave L, Dec 4, 2006.

Thread Status:
Not open for further replies.
  1. Dave L

    Dave L Member

    Joined:
    Nov 2, 2006
    Messages:
    4
    Any one know how to replace the barrel spring on the .32 cal. Berreta Tomcat.
    Mine broke and fell out when I opened the barrel. I have a new spring but can't tell which way it sits in the receiver. I called Berretta, they said they would get back with me.
     
  2. GeorgeR

    GeorgeR Member

    Joined:
    Dec 19, 2005
    Messages:
    231
    Location:
    Boca Raton, FL
    Tomcat Bbl spring

    Here's what I'd do..Remove the mag, push the bbl release forward tipping up the bbl. Cock the hammer, pull the slide back a little and lift the front of the slide off the frame. Move the slide forward and off the frame. Drift out the bbl pin-it's tight because of the alloy frame. Lift off the bbl and drop the new spring in the recess in the frame. Reassemble. Piece of cake.
     
  3. Dave L

    Dave L Member

    Joined:
    Nov 2, 2006
    Messages:
    4
    Thanks
     
Thread Status:
Not open for further replies.

Share This Page