I have been churning through the forums trying to find possible solutions for my Buckmark Camper's FTE problem. I've only used CCI Stingers and Federal Bulk ammo (550rd pack) thus far. The Stinger's tend to work a bit better; however, either way I go ammo wise, I usually get at least 1 if not 2-3 FTE per magazine. I have 3 magazines and it's pretty consistent. Any suggestions?
I upgraded the barrel with a Tactical Solutions Trail-Lite; the problem existed before and it continues now. From what I've read, Buckmarks can be picky about their ammo diet. At the same time, I often see a lot of Buckmark owners that say they've fed thousands of rounds of whatever without issue. I know that a bold statement like that can hold true with Glocks, but 22's???
Furthermore, I came across the Volquartsen Exact Edge Extractor. Unfortunately, I didn't notice at the time of purchase that all the positive results from this upgrade (that I saw on the forums) were geared toward the Buckmark Camper's rival .22 (the Ruger MKII/MKIII).
So in addition to my Buckmark FTE question, my secondary question is... Although the extractors are slightly different in design (the Buckmark has a unique notch in the inside "flat" section of the extractor whereas the Ruger's is just flat), do you suppose the Volquartsen Exact Edge Extractor can work in a Buckmark Camper?
In advance, I appreciate you all taking the time to answer these wildly ignorant questions. But alas, they must be asked nonetheless.
I upgraded the barrel with a Tactical Solutions Trail-Lite; the problem existed before and it continues now. From what I've read, Buckmarks can be picky about their ammo diet. At the same time, I often see a lot of Buckmark owners that say they've fed thousands of rounds of whatever without issue. I know that a bold statement like that can hold true with Glocks, but 22's???
Furthermore, I came across the Volquartsen Exact Edge Extractor. Unfortunately, I didn't notice at the time of purchase that all the positive results from this upgrade (that I saw on the forums) were geared toward the Buckmark Camper's rival .22 (the Ruger MKII/MKIII).
So in addition to my Buckmark FTE question, my secondary question is... Although the extractors are slightly different in design (the Buckmark has a unique notch in the inside "flat" section of the extractor whereas the Ruger's is just flat), do you suppose the Volquartsen Exact Edge Extractor can work in a Buckmark Camper?
In advance, I appreciate you all taking the time to answer these wildly ignorant questions. But alas, they must be asked nonetheless.