CZ PCR RED DOT OPTIONS

Discussion in 'Handguns: Autoloaders' started by grogetr, May 1, 2021.

  1. grogetr

    grogetr Member

    Joined:
    Sep 20, 2013
    Messages:
    243
    Location:
    Il.
    I am thinking of putting a MRD on my PCR. The holosun 407k fits the size of the slide good but has a pretty small window. For anyone that has used one are there any down fall to using one compared to a 407c or a Vortex Venom that have a bigger window which are the other ones I am considering.
     
  2. sevt_chevelle

    sevt_chevelle Member

    Joined:
    Oct 23, 2012
    Messages:
    455
    Location:
    Wisconsin
    The only dots I have on CZs right now are OR models. The larger holosun/rmr won't fit a CZ slide without a plate, I believe everyone uses the Trijicon 1911 plate.

    The smaller holosun can be direct milled into slide.

    I have 3 PCRs if and when one gets milled it will look like this.
    https://m.facebook.com/cajungunworks/photos/a.1208866055938841/1727966064028835/?type=3&source=54

    I would choose between CGW, CZ custom and Impact Machine for mill work. I seriously doubt anyone has milled more CZs than CGW.
     
  3. grogetr

    grogetr Member

    Joined:
    Sep 20, 2013
    Messages:
    243
    Location:
    Il.
    Thanks, I talked to CGW yesterday they are 3-4 months out on getting it done. I am just concerned if the small window size will be a problem seeing the dot and the smaller sight picture.
     
  4. sevt_chevelle

    sevt_chevelle Member

    Joined:
    Oct 23, 2012
    Messages:
    455
    Location:
    Wisconsin
    They make a 6 moa dot in the 407. I do wish holosun would move beyond that stupid Eotech style dot.

    Scott over at Impact Machine was put part of CGW until a year or so branched out to focus more mill work.
    He currently has Sig P220 getting milled and a pretty rare steel framed compact decocker getting hard chromed.
     
  5. viking499

    viking499 Member

    Joined:
    Feb 9, 2007
    Messages:
    3,723
    I like the circle and dot of the 507. Currently have a 507k sitting here that I am going to put in a 365XL and see if I like it before I have my PCR upper milled. Primary Machine is my front runner right now for having it milled.
     
  6. sevt_chevelle

    sevt_chevelle Member

    Joined:
    Oct 23, 2012
    Messages:
    455
    Location:
    Wisconsin
    Not gonna happen. Primary machine is out of the milling business. They shifted focus into making parts for OEM.
     
  7. viking499

    viking499 Member

    Joined:
    Feb 9, 2007
    Messages:
    3,723
    Well, guess I will go to plan B....just need to figure out what plan b is ......
     
    chicharrones likes this.
  8. Erief0g
    • Contributing Member

    Erief0g Contributing Member

    Joined:
    Mar 13, 2018
    Messages:
    697
    Location:
    Charlotte, NC
    Primary machine did my Shadow 2 trijicon SRO
    20200311_194924.jpg 20200311_194915.jpg 20200311_194905.jpg 20200311_194852.jpg 20200311_194847.jpg 20200311_194839.jpg 20200311_194831.jpg 20200311_194823.jpg
     
    Nature Boy and chicharrones like this.
  9. chicharrones

    chicharrones needs more ammo

    Joined:
    Jan 19, 2010
    Messages:
    8,142
    Location:
    Galveston Bay is an Hour Away ©
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice