Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

CZ SP-01 owners: what recoil spring do you use?

Discussion in 'Handguns: Autoloaders' started by strat81, Aug 1, 2008.

Thread Status:
Not open for further replies.
  1. strat81

    strat81 Member

    Joined:
    Oct 6, 2006
    Messages:
    3,912
    Location:
    Nebraska
    CZ SP-01 owners: what recoil spring do you use? Stock? Aftermarket?

    If aftermarket, what weight and what types of ammo do you shoot?
     
  2. lysander

    lysander Member

    Joined:
    Mar 23, 2005
    Messages:
    585
    I'm running mine bone stock...have a little under 1K through it with no problems yet. Almost all ammunition has been either UMC or WWB.
     
  3. everallm

    everallm Member

    Joined:
    Jun 6, 2007
    Messages:
    1,504
    For my SP-01 I'm still using the stock springs and have used 115 and 147 FMJ, EFMJ and JHP, mostly WWB and some PNC Bronze.

    To date no issue at all, I've just hand loaded a batch of hottish 124 FMJ and JHP I should be shooting next week I'll post if there are any issues....not that I'm expecting any.....:cool:
     
  4. atblis

    atblis Member

    Joined:
    Feb 19, 2005
    Messages:
    4,531
    Location:
    Neither here nor there
    I never had a problem with mine with the stock spring. That being said, I am still convinced a lighter spring would be a good idea for normal 9x19 ammo.

    I think a stock 75B spring would be a good place to start.
     
  5. HGUNHNTR

    HGUNHNTR Member

    Joined:
    Nov 17, 2006
    Messages:
    2,541
    Location:
    Georgia
    factory spring works well
     
  6. burningsquirrels

    burningsquirrels Member

    Joined:
    Apr 1, 2008
    Messages:
    1,562
    Location:
    Georgia
    factory spring is excellent. however, i just started loading my own ammo and will be tuning it for competition.

    most of the guys i know with an SP-01 for competition purposes load their own ammo with a 124grn truncated cone over titegroup with a lower recoil spring.
     
  7. schmeky

    schmeky Member

    Joined:
    Mar 17, 2006
    Messages:
    2,190
    Location:
    West Monroe, Louisiana
    The Angus Custom Shop SP comes with a lighter mainspring, but I can't remember the poundage. I shoot everything in mine from light loads to factory ammo.
     
  8. jdc1244

    jdc1244 Member

    Joined:
    Sep 2, 2007
    Messages:
    744
    Location:
    Florida
    Mine runs fine with the factory spring.
     
Thread Status:
Not open for further replies.

Share This Page