CZ75B <-> CZ P-01 parts interchangeability, specifically trigger?

[grimjaw]

When I initially tried out the CZ75B, I didn't like it because of the trigger reach. I have stubby fingers and it was a bit too long. Everything else about the pistol was great. Does anyone here know if the CZ75 PCR or CZ P-01 more curved triggers will slap into a standard full size CZ75B?

jm

 

[Calhoun]

Go straight to the horses mouth, shoot an email to Mike Eagleshield at CZ-USA. [email protected]

 

[grimjaw]

Mike's probably getting tired of me by now.

Much thanks, though.

jm

 

[viking499]

When you find out, let us know. My fingers are in the same boat

 

[1SOW]

On the CZForum.com they say it will (Might have been the SP-01) and recommend it to slightly shorten the reach.
ALSO the CZ stock cheapie rubber grips are VERY thin and will also shorten the reach.
Puting in a 15lb (30lb is stock) Wolff hammer spring will make the trigger so much easier and smoother, it'll feel like you shortened it.
And last: Those expensive thin aluminum grips shorten the reach noticeably.

 

[Cheesewhiz]

They will switch out, not much of a difference between them.

The SP-01 trigger is the same as the P-01's, the 75's has a lesser arc to it.

 

[JDGray]

They will switch out, not much of a difference between them.

The SP-01 trigger is the same as the P-01's, the 75's has a lesser arc to it.

+1 to this.

The CZ75B SS comes with the recurved trigger, not enough difference to make it worth while.

 

[Samuel Adams]

When I initially tried out the CZ75B, I didn't like it because of the trigger reach.

This is the very reason I sold my Sig and bought the CZ-75B with the Single Action trigger.

 

[eerw]

the recurved trigger is the version on the SP01, 75 stainless and the P01..it brings back the trigger slightly..makes a difference for me, especially in combination with a thin grip, like the flat aluminum.

if you have thick fingers you may not like the recurved triggers as have seen where it can pinch those with big fingers.

it is easy to switch out by yourself or your gunsmith.

 

[briang2ad]

Thin Grips

Help - thin are the Cocobolos (CZ USA). Thinnest are the Ghostholster Aluminum. Of course the trigger reach problem ONLY happens in DA mode - not necessarily an issue with the B Model.

 

[Cheesewhiz]

One thing I forgot to add in my first post is with the SP-01 and P-01, your hand rides a little higher on the grip. That makes the reach just a little shorter.

 

[CZF]

Send your gun to Mike for a SA conversion.

I had a CZ-USA SA .40 a few years ago.


Easily the most accurate
pistol I'd ever owned, until my SA 97B came along.

Again, the SA 40s trigger was incredible, but have him use one
of the alum. or steel triggers instead of the plastic ones.

Don't forget to add some real deal nites. They make a huge difference in daytime shooting.

I opted for MMC adjustables on my gun after MIKE did his magic.