Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Glock 30 & CZ Rami both the same?????

Discussion in 'Handguns: Autoloaders' started by Gary in Pennsylvania, Jan 31, 2009.

Thread Status:
Not open for further replies.
  1. Gary in Pennsylvania

    Gary in Pennsylvania Member

    Joined:
    Dec 19, 2003
    Messages:
    683
    How can the RAMI & the Glock 30 both be dimensionally similar (height & width) yet both have the same capacity (10 for 9mm & 10 for .45acp).

    How did Glock do that?

    I'm ready to drop some coin on my next compact-ish gun. Looking at a RAMI & an Glock 30sf........which should I pick? And why?
     
    Last edited: Feb 1, 2009
  2. Little_Bigman

    Little_Bigman Member

    Joined:
    Jan 31, 2009
    Messages:
    63
    The glock as a polymer framed gun can have thinner walls on the grip and use a double stack or staggered magazine.

    I believe the cz rami line is available at 14 rounds for the 9mm and 10 for the 40S&W

    I don't know that I have a prefrence one way or the other
     
  3. glassman

    glassman Member

    Joined:
    Feb 7, 2007
    Messages:
    730
    Location:
    Springfield, Pennsylvania
    can't speak for glock

    I don't know a whole lot about glocks other than they have a loyal following. The Rami comes in 9mm and .40 cal. The alloy frame on the Rami and double stack mag allows for 10+1 while the .40 allows for 8+1. The web sight is a bit confusing in that they say there is a 14 round mag available. It could be that they're talking about the Rami P that has an extended mag. I have to ask about that. There was a lot of talk about problems with the .40 but apparently, those problems have been rectified in the newer models coming out. If the Rami is anything like the 75 line, it should be solidly built and reliable. Like you, I am seriously looking at the Rami in 9mm as my next purchase but still have a little research to do.
     
  4. PO2Hammer

    PO2Hammer Member

    Joined:
    Nov 30, 2003
    Messages:
    3,221
    Location:
    MINNESOTA
    I've never fired a CZ, but the Glock 30 is my favorite Glock. Tremendous practical accuracy.
     
  5. EAJ

    EAJ Member

    Joined:
    Apr 22, 2008
    Messages:
    485
    I have one of each, and both are very good handguns.

    The Glock 30 is one of the most popular in the line and accurate. Some feel it is too bulky but I find it reasonably comfortable (average size hand) and shoot it well with the addition of a Pierce grip extension.

    The CZ RAMI is similar in dimensions but I think that you’ll find that if you compare it to the G30 it is less bulky in the grip area which makes it very comfortable to hold. The addition of a modified Springfield XD Pierce grip extension on the 10-round magazine provides a place to support your pinky finger.

    IMO, the CZ would be better choice for concealed carry.

    Recoil is comfortable with both handguns.


    [​IMG]

    [​IMG]
     
  6. thirdeagle

    thirdeagle Member

    Joined:
    Oct 31, 2006
    Messages:
    103
    Location:
    Omaha
    I carried the CZ RAMI 9mm for years before moving to the Glock 29, which is dimensionally similar to the Glock 30. I liked the CZ. You have the DA/SA option that Glocks lack. The CZ could be dressed-up with aftermarket grip panels not to mention you now have a choice between alloy and polymer framed versions of the CZ. On the other hand, the Glock29/30 lacks all the sharp edges characteristic of the CZ and aftermarket parts/accessories are easier to find for glocks. Both are great shooting handguns but I would have to give the nod to the Glock 29/30 for all around concealability and performance. Besides, I'd rather carry .45/10mm than a 9mm/.40 anyday.
     
  7. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    I recall the G30 I had as being quite a bit larger, especially in width, than the CZ RAMIs I've looked at.
     
  8. Gary in Pennsylvania

    Gary in Pennsylvania Member

    Joined:
    Dec 19, 2003
    Messages:
    683
    Nice.

    Thanks for all the replies, folks!
     
  9. CZF

    CZF Member

    Joined:
    Jan 6, 2003
    Messages:
    1,988
    G30 was wide for my hand. RAMI is just right.
     
Thread Status:
Not open for further replies.

Share This Page