After much revision and machining, we got the first batch of KA-1222's off the line today. This is our first unit that is strictly a thread-on install, they are threaded for 1/2x28 and use a standard A2 crush washer. These are a direct replacement on any AR15 or M16 rifle and will fit any other 1/2x28 barrel as well. We've also got a 13x1.0 tap coming in soon and will run a small batch for Galil rifles with the Israeli barrels. This brake/suppressor is designed to cut recoil and flash, in a package that is thinner than an A2 "birdcage" and almost identical in weight (<2gm difference). We'll have them out at some of the upcoming shoots and some vendors will be running them so you might see them elsewhere as well. We'll have a short demo video compiled this week hopefully if we can get some time to work on it. They will be finished with a dark parkerization. Here's a couple pics of one installed on an AR. It is hard to take a photo of the port layout, but there are 6 ports on either side seperated at 45 degree intervals (we run a '6/45' layout on most of our brakes).
We'll have some better pics up when we finish resizing the pictures and editing video.
We'll have some better pics up when we finish resizing the pictures and editing video.
