gun you regret buying...

Status
Not open for further replies.

trigga

Member
Joined
Jul 31, 2007
Messages
1,099
Location
WI
I know some of you have been in a similar situation before where you kind of rushed into a gun and shortly after you regret buying it. well the gun still sits safely in my cabinet with less than 100 rounds through it and appears new as if i had just unboxed it. it's my savage 93r17. it was the gun i had wanted and looked for for over a year and when i saw it, i knew i had to buy it for the price. It was all black synthetic stock. heavy barrel with no sights, low profile rings and a high power scope with 5 round magazine. the only thing missing was the accutrigger. they didn't have the model I wanted with the trigger at the time and my intentions were to swap out the trigger for an accutrigger.

shortly after i bought it i was searching for the accutrigger and couldn't find one. I called savage and they said it has to come with the gun, there was no other way of getting it. which sucks. i tried loading the gun for the first time and notice a jam. gun wouldn't feed. wow a bolt action jamming? is that even possible? there really was no feed ramp and the magazine was tilted up so the rounds would find it's way into the chamber. you had to load it right for it to work or the bullet tip will hit the breach face which was another bad feature.

taking it to the range the gun was very accurate but the trigger was horrible. too much creep and stiffness. I also notice when pulling the bolt back, sometimes the rounds shoot up the magazine and fly all over like the spring was too strong or something. i took it squirrel hunting a few times and had a few issues. the rounds keep coming up the top of the magazine, would fail to feed. i had a few failure to fire too. I think this is because of a light strike from the firing pin. i did dry fire the gun a few times, now i keep an empty casing for dry firing. took it hunting for two days and had the same results so i decided to retire the gun for the season. went back to the range and wasted all the ammo i had left. just then and there the gun decided to perform flawless with no issues except the crappy trigger. a few of the remedies i found out were that the magazine lip had to be pressed in more and the light firing was due to the bolt not being fully down. it's kind of hard keeping the bolt down passing through the woods. it's so easy to move the bolt which is good and bad in a way.

I was thinking about trading it for a marlin with similar specs. i like their fit and finish a lot better. after shooting my cousins marlin i'd have to say i like the savage action better. it feels smoother for me and the savage feels slimmer. i'm still thinking about selling it for the same thing but with an accutrigger. don't know if it's worth trying out a trigger job or and aftermarket. I'm giving this gun another season to prove itself before it goes in the trash or back to the dealer.

sorry if that was a long story. please share with me your stories too if you have one similar to mines.
 
About half of them. Never get to shoot as much as I'd like. Silly really.
 
Taurus Judge Public Defender

Cylinder timing issues, some .410 casings would bulge and jam the cylinder. Almost needed a rubber mallet to get it open. That and the total uselessness of the .410 out of a 2" bbl. :banghead:

Century build Polish Tantal

Keyholed with cheap surplus ammo and not as cheap silver bear. The $20 per box Hornady was fine. :fire: Took it back and got a refund and the gun shop found a small crack in the receiver above the chamber, too. :what:

Not regret, but a little disappointed with my Howa 1500 in .308 Win. It holds a group of about 1.5-2" with factory ammo at 100 yards. I'm sure I could get it down with handloads but I don't have time to load, do a range check, load, range check. It has the pencil sporting barrel on it and that may have something to do with it. Still, it kills deer just fine! :) And the stock is a little bendy, but is comfy and fits me well enough. I just wish an ACIS stock didn't cost as much as the rifle. :cuss: But a Bell and Carlson medalist will work fine for what I need.
 
The one I really regretted was the Colt Combat Commander I bought after seeing it in the case at the place I shot at. It's the most expensive gun I've ever bought, even though it was almost 30 years ago. It was a joke, not a quality gun at all. Two trips to Colt didn't help much, and a local gunsmith had nothing good to say about it, and said he could get it to shoot OK, but it would cost a lot of money. I sold it for a loss to a Colt fanboi, and that was the last Colt, and last 1911 I ever had.
 
Steyr SPP, just sold it today, finally :D, the trigger is ridiculous and whatever that rotating bolt stuff is i dont see it, and if its not a TMP with the front fore grip and you dont buy a butt stock for it, you cant aim it..
 
Sticking to guns that were faulty (as opposed to ones I simply turned out not to like for various reasons): Taurus PT945 (1995), Para-Ordnance P12-45 (1999) and a SIG 1911 (2007). In the case of the SIG, I do give them credit for servicing and replacing it.
 
Short and sweet........ A Win 100 in 308 cal. What a lousy piece of crap!
To heavy. Could not get a "decent" grouping not matter what.
To add to it, I don`t like the .308 at all. More of an "06" guy really.
Only one thing to do.........I gave it to my brother. :)
 
One of the biggest dissapointment gun I have ever had? My H&K 91. I lusted after it for a couple of years. I read everything I could find and it was all positive. I finly made a deal that took all my play money (not that I had a lot at the time) and my Browning High Power (ouch). But I got it. Took it to the rang and found the ergonomics were bad and everytime I pulled the trigger the hump on the back of the stock would bash me in the cheek. I mean I was black and blue by the end of the day. I ended up tradding it and some more cash off for a BM 59, which I later sold cause it wouldn't shoot worth a dang. I finly got a Fal and my search for a 308 MBR ended. Cheap mags (at the time) and cheap surplus ammo (also at the time). I have had a couple of differant Fals sence then but its still one of the top 308s for me. It or the M1A would be one of the last ones I would sell off now a days.


Your milage may vary
WB
 
A Remington/Spartan/Bakeil 410-22lr over and under.
22 will not hold 2 inches in 25 yda, 410 shoots a 48" patern at 25 yds regardless of choke or shot size p-00 buck,
Needed 2 hands and a knee to open. trigger pull >15 pounds with severe creep making 22 use impossible.
Extractor would slip off rim of 22 and screw driver needed to remove case.
Sent back for warranty repairs and they fixed extractor but not difficulty in opening. They said that they DID NOT do trigger work.
Still poor accuracy, very difficult to open and trigger impossible to get a reasonable 22 shot
This $395 piece of junk sits in my gun cabinet with no projected use. I hoped it would be my 25 yard truck gin
DO NOT BUY ONE OF THESE COMBOS
I REALLY DON'T UNDERSTAND WHY REMINGTON HAS THEIR NAME ON THESE
 
A Smith Sigma, had several members on here tell me I was nuts to get it...went furthur and proved them right!! Most impossible trigger I ever tried. After several trips back to S&W, I traided it off.
Dan
:mad:
 
Taurus model 85 .38 special. Piece of junk from the beginning. Cylinder would bind up and light strikes in some of the charge holes. Sent it back 3 times and after they finally got it working again I just couldn't trust it so I sold it for a loss. Also a Taurus PT-22 semi. It would not feed properly, the trigger was terrible and it was wholly inaccurate at 7 yards. To this day I stay away from Taurus arms completely.
 
Last edited:
Century WASR-10. Minute of barn accuracy. I think they let the drunken monkeys practice on mine.

Sig Mosquito. Never found any ammo it would run reliably.
 
Skyy CP-1. Wouldn't trust my dog's life to it. It did good for 84 rounds but the 85th took all of my trust out of it.
 
I lusted over a Romanian PSL forever... took me a month to finally find one in stock. Ordered it, opened the cheap cardboard box to find all of the super cool accessories (military scope cover, light diffuser, cleaning kit, ect...) It had a decent stock and nice bright clear original scope. I was like a kid on Christmas morning...

I take it home and clean it and then to the range to try it out. It functioned fine. It took about 75 rounds to get it zeroed... Even after reading a dozen ways online to do it and the instructions that came with it.... Once I would get it zeroed for 100yds, I would move out to 150 and have to start all over again. I knew the scope was offset from the bore, but it was ridiculous. I couldn't get groups better than a foot in diameter at 100 yards. I tried several kinds of surplus ammo but that didn't help. I wasn't about to try brass because I bought it to shoot cheap ammo, not to mention that it ejects brass about 40 feet away and there better not be anybody sitting next to you because they might need stitches after getting hit with one...

Then on to cleaning... I knew I would have to clean a lot shooting surplus corrosive ammo... no big deal... So I thought... the metal finish was so rough that you couldn't just run a rag over it. Spray it down with oil and you couldn't wipe it off. The muzzle break was full of slots that were impossible to clean because it was tack welded on. I zipped the weld off and it was still a hassle to take off and on and clean all the time.

The trigger was horrible....

It was just such a disappointment. It wasn't fun to shoot. The ergonomics were horrible. there was a lot of recoil and muzzle blast. It was insanely loud.

I ended up selling it for a loss.
 
CZ 52 I bought two or three years ago. Bought because, well, it's unusual retro appearance. After buying it and taking it apart at home, I discovered the barrel had a hairline crack, it had a flat roller, and a weak recoil spring. Replaced all problems and took it to the range. I've probably shot 200 rounds through it, but it still fails to feed and fails to eject the brass after running about three or four mags through it.

It now sits unused in the back of my safe.
 
Regrets?

Bersa Thunder - went south on me after about 200 rounds. Slide wouldn't cycle and even if done manually wouldn't fire.

I should send it off to a gunsmith and get if fixed but I have a Bulgy Mak that fits the Bersa's role - and is a hell of alot more reliable.

I guess I got a lemon as mine seems to be the only Bersa thats ever choked. :(
 
XD-40 Sub-compact.

Nothing wrong with it, but I got it as a lighter, smaller alternative to carrying my lightweight 1911 commander. Quickly found out that even though it looks pretty tiny, its no easier to conceal for me than a full-size 1911. Traded it in for a Kel-tec P3AT + ammo and accessories, which I love as a pocket carry, so it didn't turn out too bad.

I also picked up a older, heavily customized, Springfield 1911 Champion at a gunshow for a steal. I quickly found out why at the range. Replacing recoil spring and extractor and a few minor tweaks have it running 99% with full power 230 gr loads, but it doesn't eject anything lighter. If a 16lb recoil spring doesn't do the job, a new ejector is on order.

It has been a headache since I got it, but on the bright side, I have learned quite a bit about the function and fitting of the 1911.
 
I've never regretted buying a firearm but sure have regretted selling the only one I ever parted with....... Yes - I've only sold one in my life.... Learned my lesson after that.

The Dove
 
Bought a sterling automatic 22 lr pistol back in the late 70's or early 80's and it turned out to be jamomatic. I bought it new and it was fairly inexpensive and I ended up just giving it away.
 
Model 600 Remington in 6 mm, 8XX SN, bought new in 1966, if I remember correctly. The front brass bead was so large it completely blocked the rear site notch making the open sites useless. Scoped it with a 6x, the best 100 yard groups I got were 5 inches, with every type ammo I could get. Rescoped it with a 2-8x, the best 100 yard groups I got were 5 inches, again. Sold it to my brother-in-law. He wanted it for the collector value. Don’t think he ever shot it. Bought a used Winchester M70 30-06 with a 4x scope. Shot 0.8 to 1.3 inch groups with it. It wasn’t me!

+1 on the Sig Mosquito. Didn’t feel like a Sig 22x, and was a spiter with any ammo that would function in it. I don’t like power in my face.
 
Taurus PT-25
I bought it off of a friend who was out of work for $50.00
Why? I don't know, couple of boxes of rounds would cost more than the POS is worth!
One thing is that the massive 25 auto round has all the range and "stopping Power" of a flicked booger.
And I do thoroughly believe the "metal" this thing is made of is recycled from scrap Chinese Wal-mart belt buckles.
It's Not even a good paperweight, too light!
I'm certainly not one to judge harshly, but I do believe that the factory that makes this "thing" should be burned to the ground and the production manager publicly hanged.

PS. Anyone looking to buy an Excellent Taurus PT-25?
 
Last edited:
Yes I bought a Ruger #1 in 300 Win. mag. It did not fit me right, and I could only fire about 5 rounds without getting a black eye. Absolutely beautiful rifle, and I really didn't want to sell, but it just hurt too much to shoot.
 
Yes I bought a Ruger #1 in 300 Win. mag. It did not fit me right, and I could only fire about 5 rounds without getting a black eye. Absolutely beautiful rifle, and I really didn't want to sell, but it just hurt too much to shoot.

reminds me of my 870 12 gauge with rifle barrel. got hit a few times with the scope lol
 
I regret buying:
Glock 23
MPA30T
RRA LAR8
Walther P22
Colt Commander
Taurus 24/7
Para GI Expert
 
Status
Not open for further replies.
Back
Top