Lee Six Pack Pro New Design Case Feeder

[rotorloader]

I found this on youtube and bought the 3D printer files and I can say that it is a great improvement over the Lee unit. You can buy the complete printed kit or the 3D printer files from the designer. He is very responsive and made a slight improvement after I contacted him. I am not affiliated with him except as being a customer. Here is his video.

He sells here https://grimnir3d.etsy.com …

If you build your own the best source of the compression springs is here

https://www.aliexpress.us/item/3256803793115725.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.1.5a90rsAkrsAk1y&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=c974c4e7-2a10-4bb5-9fbb-8c052cd5b265&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:c974c4e7-2a10-4bb5-9fbb-8c052cd5b265,tpp_buckets:668#2846#8115#2000&pdp_npi=4@dis!USD!1.43!1.22!!!10.24!8.70!@2103250717088246679585762e6e39!12000027626192356!rec!US!!AB&utparam-url=scene:pcDetailTopMoreOtherSeller|query_from:

 

[LiveLife]

He is very responsive and made a slight improvement after I contacted him

We are already aware of his case feeder and I like the design - https://www.thehighroad.org/index.p...nted-case-feeder-for-the-lee-pro-6000.927407/

Can you mention what "slight improvement" was made?

Thanks.

 

[rotorloader]

We are already aware of his case feeder and I like the design - https://www.thehighroad.org/index.p...nted-case-feeder-for-the-lee-pro-6000.927407/

Can you mention what "slight improvement" was made?

Thanks.

I was setting up for 32 ACP using new Starline brass (please stop laughing) and my brass was dropping on its own. Starline brass rims are perhaps smaller than some brass. Designer made a new lever design that I printed and even 32 ACP drops perfectly.

Missed the running thread on this already.

 

[LiveLife]

32 ACP using new Starline brass ... brass was dropping on its own. Starling brass rims are perhaps smaller than some brass. Designer made a new lever design that I printed and even 32 ACP drops perfectly.

Thank you.