You got a deal.
I have had one of those for decades. It is a great press, massive cast iron construction, lots of leverage for small base sizing 30-06 cases. Mine, the handle angles a little off to the side on the down stroke and that is good for the elbow and wrist. I have multiple turrets and never used them. With good dies and a controlled amount of case lube, I had case neck run outs a thousandth of an inch. Strangely, too much lube and erratic levels of lube increased case neck run out.
My main complaint is primers coming out of the primer cup. A tight primer will eject itself out of the collecting cup as it rebounds from rocketing out of the pocket. Never hurts to have a shop vac near by to vacuum up primers.
Had powder spills today pulling bullets. A shop vac is an indispensable reloading accessory!