Non-metallic 'tactical' pen?

Status
Not open for further replies.
OC-Trainer

OC-Trainer

Member
Joined
Dec 17, 2014
Messages
567
I came across an old thread were there was some talk about a polymer tac-pen being created for THR members. Did this ever come to be?
 
Thanks for the link, MaterDei. I have the original Pocket Shark (it's huge). Looking for something that is an actual pen. Only one on the market has been DC'd.

I should add that I may (keyword) be able to help make this happen if there is enough interest. I just got done working with a prototyper on another project. Can't make any promises since I'm not a machinist, but couldn't hurt to ask.
 
Milwaukee Inkzall- the size of a Sharpie, better gripping surfaces, chisel tips on each end, quite sturdy, and available at most hardware stores. Also writes on more surfaces than a Sharpie.
 
@AJumbo - Thank you for the tip. I like that a lot.

@Click - Thanks. I actually had the Archangel. Lost it a week ago. I've been told it has been discontinued. I tracked a few left overs down on Amazon, though. I'll see if I can grab one.

Thank you both for your responses.
 
Thanks to all who replied. I think I'm going to see about getting some custom made.
 
Polymer, for sure. I'm fond of acetal (Delrin). I've experimented with it for a previous prototype. I already have a design in mind for this.

As non-permissive environements grow, I've found that most of the check points I'm traveling through will confiscate/deny virtually anything that remotely resembles a tactical pen, since virtually all of them are designed to puncture. Markers (partially due to the bluntness, I suppose), sail through. Problem is I need a pen. So, I guess I'll see about getting them made. I'll report back any findings on this.
 
If you're willing to spend some time practicing, a braided 550 lanyard with a carabiner on one end, and your choice of keys or flashlight on the other, makes an effective improvised weapon, and I've taken both versions through some very rigorous inspection points.
 
I'm not sure I understand why it needs to be non-metallic. It won't fool a metal detector, and being metal doesn't make it tactical. Ordinary pens like the Zebra F-701 would do the trick.

Alternatively, I've recently adapted John's idea and it also seems to not raise any alarm bells with security.
 

Attachments

  • IMG_6790.jpg
    IMG_6790.jpg
    81.8 KB · Views: 202
glistam said:
I'm not sure I understand why it needs to be non-metallic. It won't fool a metal detector, and being metal doesn't make it tactical. Ordinary pens like the Zebra F-701 would do the trick.

Alternatively, I've recently adapted John's idea and it also seems to not raise any alarm bells with security.
Click to expand...
It has nothing to do with metal detectors. Metal bodied 'tactical' (I hate using that word in this context, BTW) pens do not meet my needs. Here's why:

• I don't want something that will puncture. If I wanted to stab or puncture someone I'd just use a pencil or any pen, like the one you mentioned. I want something blunt, to disrupt the CNS if pushed into that roll. More kubotan, less shank. Markers meet this criteria, but I need/want a pen.

• I want something that would be robust, yet somewhat disposable. Making it from a resin will help keep the costs down considerably. Put another way, if I have to drop it and go or if I loss it, it is no big deal.

• The right resin has additional benefits over aluminum or steel in this roll, in my opinion. Doesn't get cold in freezing temps, chip, etc.

I do like John's suggestion, and have been using a similar set-up for years.
 
Thanks! It's 2 strands doubled over. The length is a 4-strand round braid, ended in a wall-and-crown, then reversed in a series of crown knots.
 
Genuine 550/Type 2/Type 3 cord is plenty strong at even a single strand, but a single strand wouldn't look as nice. Potentially even more importantly, the braid should be thin enough to be flexible, but thick enough not to burn your hands and fingers if you let the braid run through it at speed. Of course, it's possible to use these defensibly while only holding onto whatever is mounted at each end, but that limits your options.

John
 
MillCreek said:
OC-Trainer, please mark me down as someone who is interested in your polymer pen concept.
Click to expand...
Got you covered, MillCreek and thanks for the interest.

I have a few calls in for quotes. I should know something definitive be the end of the week. The cost of the polymer is ridiculously cheap. The machining/labor is where the majority of the costs lie. This will be 100% US made, too.
 
Will do, John. Also, if you or any other members have any requests for specs or whatever, feel free to drop it in this thread. I'll try my best to make it happen.

I can say this, it will never be "advertised" as tactical, that's for sure.
 
I might be interested if it used Fisher Space Pin refills.

For me, Nothing else is worth carrying.

(Says the guy who has carried the same Parker S/S pin with a Fisher cartridge for 30 years.)

Nobody with a metal detector has ever given it a second glance.

It's not a Kubaton though.

PS: Anyone old enough to remember when the Mont Blanc "Meisterstuck" fountain pin was the ultimate stealth under the radar Kubotan available back in the 60's?

http://www.amazon.com/MontBlanc-149-Meisterstuck-Fountain-10575/dp/B0018NVDOK

Wowzer!!! They haven gotten any cheaper!!

rc
 
Last edited:
No.

That would be confiscated at the first airport or federal building you tried to get in.

It is clearly designed to be a stabbing weapon, not a writing instrument.

Don't even try to get it past TSA, or court house security.

rc
 
I might be interested if it used Fisher Space Pin refills.

For me, Nothing else is worth carrying.

(Says the guy who has carried the same Parker S/S pin with a Fisher cartridge for 30 years.)

Nobody with a metal detector has ever given it a second glance.

It's not a Kubaton though.
Click to expand...

RC,

When we sat down and started to make a list of all the things we'd like to see in a pen of this nature, Fisher SP refills was the first requirement. The second, was that it needs to be completely sterilized - in name (it can't be called "signature slayer" or other such nonsense) and appearance.

In fact, the list of 'wants' was so long that accompanied the drawings, that I doubt some of them are even doable and/or will be too cost prohibitive.
 
Status
Not open for further replies.

Similar threads

JShirley
  • Locked
Tactical Pens
2 3 4
Replies
83
Views
6K
InkEd
I
G
  • Locked
Tactical stylus pen?
Replies
18
Views
2K
JTW Jr.
J
C
  • Locked
Non-lethal and expedient weapons: Pens and Umbrellas
2
Replies
43
Views
2K
JShirley
JShirley
stinger 327
  • Locked
Tactical pen
2 3
Replies
69
Views
7K
stinger 327
stinger 327
hso
  • Locked
Mathew Martin Pens
Replies
7
Views
945
hso
hso
Back
Top