I have had great luck with ONE SHOT and have had NO stuck cases as long as I shake well, apply liberally, AND let dry completely. Boys is that stuff expensive though. I searched on the interweb and found out how to make my own Lanolin based brass lube. You have to use 91-98% isopropyl alcohol and liquid lanolin. Regular rubbing alcohol will not work at all neither will lanolin products with any water content. I use about a 10% lanolin mix in mine. The article said to mix warm on a double boiler on the stove, I do not bother with this step. I mixed in a clear hand sprayer that I use to dispense with and shake gently/often as I spray to keep the lanolin in suspension. You can see the yellow lanolin when it separates. I got the isopropyl at the drug store but had to go to the health food store to get the water free liquid lanolin. It was the NOW brand of liquid lanolin that was advertised as water extracted, used for skin moisturizing. Just apply mixture well. I use a quart yogurt container and put brass in, spray some in, mix by hand, repeat twice, pour out onto old cookie sheet to dry. Reusing the container without cleaning gives more economy, I just put the lid on till the next time I need to use it and add more brass after removing the cover for the next cycle.