Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Price check on Smith and Wesson model 17 22LR

Discussion in 'Handguns: Revolvers' started by ramptester, Sep 21, 2007.

Thread Status:
Not open for further replies.
  1. ramptester

    ramptester Member

    Joined:
    Oct 14, 2005
    Messages:
    28
    Location:
    Gainesville, GA
    Does anyone have have an approximate up to date value on a non-pin, but pre-lock model 17 in like new condition, but without box or papers. Length is 6 inches, and the stocks are full size Goncalvos. The blueing is perfect.
     
  2. Iggy

    Iggy Member

    Joined:
    Dec 24, 2002
    Messages:
    3,011
    Location:
    Wyoming
    SW22.jpg

    Grips numbered to the gun.. No box, no nuthin'

    $425 a couple of months ago...
     
  3. Starter52

    Starter52 Member

    Joined:
    Oct 16, 2005
    Messages:
    1,724
    Location:
    Northeast USA
    $400 around here, maybe $450 if truly like new. P&R models are a hundred more.
     
  4. ramptester

    ramptester Member

    Joined:
    Oct 14, 2005
    Messages:
    28
    Location:
    Gainesville, GA
    Thanks, fellas.
     
  5. 22-rimfire

    22-rimfire Member

    Joined:
    Jun 11, 2005
    Messages:
    11,450
    Location:
    TN
    I have not seen one for $450 or less this year. I bought one in the condition you speak with the original box and paperwork for $100 more and that was a negotiated price (Edit: September 2007 [Good idea Xavier Breath]). I didn't think I was getting a bargain, but I felt it was about market price for the condition.
     
    Last edited: Sep 24, 2007
  6. XavierBreath

    XavierBreath Member

    Joined:
    Jan 6, 2003
    Messages:
    5,054
    Location:
    Louisiana
    Model17ssmall.gif
    Upper: Model 17-4 $400 in August, 2006
    Lower: Model 17-3 $199 in March, 2006

    For the one you describe, I'd say $400-450 would be about right, give or take a bit depending on location.
     
  7. ramptester

    ramptester Member

    Joined:
    Oct 14, 2005
    Messages:
    28
    Location:
    Gainesville, GA
    Xavier - you're killing me, man. You have access to alot of really cool stuff.

    By the way - I have enjoyed your blogs on some of your revolvers.
     
  8. ramptester

    ramptester Member

    Joined:
    Oct 14, 2005
    Messages:
    28
    Location:
    Gainesville, GA
    By the way, the guy is asking $500 flat. Face to face no taxes, etc. The gun has not been shot to my knowledge, but my intention is to use it as a training gun for myself and my son.
     
  9. bugs100

    bugs100 Member

    Joined:
    Apr 17, 2007
    Messages:
    57
    Location:
    USA
    That's the normal price around me. Their starting to sky rocket. 63's and 34-1's have broken the $500 mark and are hitting $600.
     
  10. JoeHatley

    JoeHatley Member

    Joined:
    Dec 27, 2002
    Messages:
    1,931
    Location:
    Iowa
    I paid $400 for this 17-4 about 5 years ago. It was NIB at the time.

    17_4_l.jpg

    Great shooters...

    Joe
     
  11. ramptester

    ramptester Member

    Joined:
    Oct 14, 2005
    Messages:
    28
    Location:
    Gainesville, GA
    Well, I went ahead and got it. It should be a great gun that will probably stay in the family for a very long time. do you guys suggest getting replacement parts such as springs, etc for these guns now? Here is a pic, the rest are in the revolver pics section. Thanks for all your help.

    DSC02773a.gif
     
  12. Iggy

    Iggy Member

    Joined:
    Dec 24, 2002
    Messages:
    3,011
    Location:
    Wyoming
    Very nice. Mine is 1957 vintage and the springs are fine. Shoot it and it will tell you what it needs.

    Congrats on a beautiful acquisition.
     
  13. XavierBreath

    XavierBreath Member

    Joined:
    Jan 6, 2003
    Messages:
    5,054
    Location:
    Louisiana
    Beautiful rampster! Trust me, you will be very glad you bought that revolver!

    It took me a long time to find a K-22 in my price range, but after I did, I bought the next one at the going rate.

    Parts are standard K frame stuff, and plentiful. They will be around longer than us. Enjoy!
     
  14. texas bulldog

    texas bulldog Member

    Joined:
    Feb 20, 2007
    Messages:
    1,013
    Location:
    Central Texas
    would someone here feel like giving me a rundown of the difference between the m17 and the m18? near as i can tell, it's really only barrel length. is there something else that i'm missing? thanks!

    nice looking .22 there, rampester!
     
  15. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Model 17 = K-22 Masterpeice.
    Model 18 = K-22 Combat Masterpiece.

    Model 17 usually has 6" barrel and square-cut Partridge front sight.
    Model 18 is a 4" and has a Baughman ramp front sight.

    Other then that, they are pretty much the same gun.

    1224.jpg
    rcmodel
     
  16. Old Dad

    Old Dad Member

    Joined:
    Oct 2, 2007
    Messages:
    1
    Need to unload a Smith and Wesson K-22 Model 17. Although it is not new; it is in original box. Date on box is April 15, 1955. My untrained eyes see no damage to bluing nor any wear marks on grips. Have fired it maybe 10 times in the 35 years I have owned it. K426509 is serial number. Comes with stag grips still in S&W plastic bag. How does one sell such a pistol? I guess we are supposed to tell the location - NC.
     
  17. Loucks

    Loucks Member

    Joined:
    Nov 26, 2006
    Messages:
    130
    Location:
    IN
    List it in the appropriate Trading Post forum HERE.

    Or you could just send it to me via my FFL as a gesture of goodwill. :D
     
  18. Baba Louie

    Baba Louie Member

    Joined:
    Dec 26, 2002
    Messages:
    3,831
    ramptester, that is a fine lookin K22. The target grips look very good on that K-frame.

    I picked up a K22 this afternoon, 5 screw, serial #K 2356** no box, magna diamonds, etc. I'd estimate finish at 98% as there's barely a turn ring, no wear at all (almost a match of ramptester's finish). No haggle allowed, priced at $475 in Las Vegas. I figure it was born in 1955, same as me. What did they cost NIB back then? Anyone know?

    Last year I got an 18-3, serial# 5K5596** with some wear at the muzzle and cylinder front, a spot of rust about the size of a pencil eraser of the sideplate, that I estimate70-75%+ due to the rust spot (now shiny metal, no pits that I can see, but they're there I'm sure) priced at $375, no box, etc. Looking at Supica's tome, it was birthed the same year I graduated H.S. '73.
    Same question... price back then?

    The 18 is so accurate it's scary. I expect to find out what the K22 can do this weekend. Maybe I'll have a little competition between the two and see if the 4" kid can hold his own with the 6" old man. Do you think it would be fair to borrow my daughter's little 317 3" and take it out with the older fellows? I mean the baby holds 2 more rounds, has a shorter barrel, a stiff trigger, dayglo green front sight and is... kinda a silverish grey color. (shudder) Plus it's such a lightweight. I really don't think it'd stand a chance accuracy wise, but you never know until you try.

    Anyway, it'd be nice to know their original costs and some attempt to evaluate value increase now based on wear and tear (or lack thereof) to see if Supica's numbers are close to what the market is really saying. Based on what I paid alone, he's spot on.
     
  19. GunTech

    GunTech Member

    Joined:
    Mar 16, 2007
    Messages:
    3,878
    Location:
    Helena MT
    K-22 6 inch and 4 inch. The 4 inch is not a pre-18. It's a factory sample pre-17 4 inch from 1947.

    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page