Sylvan-Forge
Member
Insert firing pin with spring. The notched part of the firing pin faces down.:
While holding the firing pin in, insert the firing pin retaining pin. It's only seated with finger pressure and it's done.:
If you decide to install the lock parts, stick the fork in as shown. Since the tang part of the fork was likely bent a little bit during removal, install it with the tang bend facing out to ease spring install. Slide it toward the muzzle with a screwdriver to clear the hole for the lock cam.:
Lock cam slips right in.:
.
While holding the firing pin in, insert the firing pin retaining pin. It's only seated with finger pressure and it's done.:
If you decide to install the lock parts, stick the fork in as shown. Since the tang part of the fork was likely bent a little bit during removal, install it with the tang bend facing out to ease spring install. Slide it toward the muzzle with a screwdriver to clear the hole for the lock cam.:
Lock cam slips right in.:
.
Attachments
Last edited: