Sig maintenence

[357wheelgunner]

My Sig P6 will be here next week. In preparation, I've ordered a spare parts kit which includes:

Recoil Spring
Trigger Bar Spring
Slide Catch Lever Spring
Decocking Lever Spring
Outer Roll Pin
Inner Roll Pin
(4) Grip Screws
(4) Grip Screw Washers

I've also ordered Wolff magazine springs and hammer spring.

I'm planning on installing all of the new springs immediately. Anyone know of a link with more information on the disassembly of a Sig P series pistol?

Also, what should I look for when the gun is apart, are there any other parts that should be replaced?

Thanks!

edited to add:

What can be done to fix a heavy trigger pull, without sacrificing reliability?

 

[Muddflap]

If you want to do this kind of thing yourself, I would HIGHLY recommend the Sig Armorer's CD from Top Gun Supply. http://www.topgunsupply.com/Sig-Sauer-Armorers-Course-DVD-P-SERIES-pr-131.html

Since the P6 has a terrible DA trigger pull, I would recommend getting a 225 mainspring, also available from Top Gun. http://www.topgunsupply.com/SIG-Mainspring-P225-226-228-229-239-Old-Style-pr-767.html That will cure the trigger problem

Good luck.

 

[357wheelgunner]

Do I need the little metal plate that the spring sits on?

 

[AK103K]

I would HIGHLY recommend the Sig Armorer's CD from Top Gun Supply.

Me too. It will walk you through everything you need to know.

 

[AK103K]

Just reuse the one thats there.

 

[rcmodel]

Heres spring info I posted some time ago:
http://www.thehighroad.org/showthread.php?t=358615&highlight=sig+p6

rcmodel