In my 270 Winchester I am experimenting with 6.5 StaBall. Wondering if any of you have as well. Or would like to share other loading experiences for 270 Winchester. I am seating a SIE 130 gr. PH flat base 20/1000 away from the lands in a Tikka T3X, stainless barrel. Load is right at Hodgdon max. Primers are WLR non magnum, and brass is fl sized PPU. I do not chrono my stuff as of yet. I am getting flat primers and sticky bolt lift. Sub MOA accuracy too.
SO, I think I may back off some 1.5 gr. and load some more. It is a pretty potent powder seems to me. These loads have some juice.
Any other experiences with it?
I am getting ready a new batch of 50 and have not really decided on powder but cases are FC, primers will be CCI 200. Going to stick with 20 thou seating arrangement.
SO, I think I may back off some 1.5 gr. and load some more. It is a pretty potent powder seems to me. These loads have some juice.
Any other experiences with it?
I am getting ready a new batch of 50 and have not really decided on powder but cases are FC, primers will be CCI 200. Going to stick with 20 thou seating arrangement.