coosbaycreep
Member
Only if you shoot your chronograph with it:
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
I went shooting earlier and was going to chronograph some of my loads, and managed to kill my chrony in the process.
I was shooting at a fairly popular area on public land, and used an old tire that someone had dumped to sit my chrony on. It was sitting at an angle because it was on a slight hill, so when I was first chronographing a 7mm, I had to squat down so I wouldn't shoot it, and had no problems.
I moved a little bit closer with the .44, but didn't kneel down enough to get a good angle and avoid hitting the chrony, and the first round hit the rear of it and knocked it off the tire. Other than a big gouge in the plastic, it looked alright, so I sat it back on the tire and tried again.
I knelt down a little further this time, but what do you know? I manage to hit the chrony right on top of the first sensor, and it went flying into little bitty pieces. So, I picked up the pieces and brought them home. It was quite depressing, but the good news is, that I had no misfires out of all the rounds I fired with the .44 today, and my 7mm loads shot good.
I actually think there's a very small possibility that it might work again, depending on how good my duct tape/super glue skills are. The wires that go to the battery are severed, but those can be soldered back no problem, and I'm fairly certain all the plastic stuff can be glued back together like some horrible jigsaw puzzle. The only thing I can see that might keep it from working, is if the sensors are busted from the impact. But, since I have lots of time, tape, and glue, there's no harm in trying.
The death of my chronograph also brings up the point of shot placement and stopping power. I had shot my chronograph twice in the diffuser rods in the past with a 9mm, and other than a mangled metal rod, it worked just fine.
44mag on the other hand, and a little better shot placement, managed to blow it completely in half. I really wish I had filmed it, as it was quite comical....other than the fact that I don't have $100 sitting around to replace it, and I feel like a complete moron for shooting it...twice, in one day.
This is just one more crappy moment in a string of bad luck when it comes to guns lately. The last two guns I've bought were complete garbage. I tried fixing one, only to ruin the barrel. I spilled about half a pound of powder the other day on the carpet that I ended up throwing away. I ordered some "once fired" brass from a dude recently, only to find out some of it was worn out. And now, I'm back to shooting holes in things I don't want holes in. Oh well.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
I went shooting earlier and was going to chronograph some of my loads, and managed to kill my chrony in the process.
I was shooting at a fairly popular area on public land, and used an old tire that someone had dumped to sit my chrony on. It was sitting at an angle because it was on a slight hill, so when I was first chronographing a 7mm, I had to squat down so I wouldn't shoot it, and had no problems.
I moved a little bit closer with the .44, but didn't kneel down enough to get a good angle and avoid hitting the chrony, and the first round hit the rear of it and knocked it off the tire. Other than a big gouge in the plastic, it looked alright, so I sat it back on the tire and tried again.
I knelt down a little further this time, but what do you know? I manage to hit the chrony right on top of the first sensor, and it went flying into little bitty pieces. So, I picked up the pieces and brought them home. It was quite depressing, but the good news is, that I had no misfires out of all the rounds I fired with the .44 today, and my 7mm loads shot good.
I actually think there's a very small possibility that it might work again, depending on how good my duct tape/super glue skills are. The wires that go to the battery are severed, but those can be soldered back no problem, and I'm fairly certain all the plastic stuff can be glued back together like some horrible jigsaw puzzle. The only thing I can see that might keep it from working, is if the sensors are busted from the impact. But, since I have lots of time, tape, and glue, there's no harm in trying.
The death of my chronograph also brings up the point of shot placement and stopping power. I had shot my chronograph twice in the diffuser rods in the past with a 9mm, and other than a mangled metal rod, it worked just fine.
44mag on the other hand, and a little better shot placement, managed to blow it completely in half. I really wish I had filmed it, as it was quite comical....other than the fact that I don't have $100 sitting around to replace it, and I feel like a complete moron for shooting it...twice, in one day.
This is just one more crappy moment in a string of bad luck when it comes to guns lately. The last two guns I've bought were complete garbage. I tried fixing one, only to ruin the barrel. I spilled about half a pound of powder the other day on the carpet that I ended up throwing away. I ordered some "once fired" brass from a dude recently, only to find out some of it was worn out. And now, I'm back to shooting holes in things I don't want holes in. Oh well.