Stature-wise, I'm short. Comes in handy for some things Not so great for for seeing in bullet and case feeders......so I'm not interested in raising my presses. Therefore, for me the flush mount will be all I ever buy.
I mounted two of them side by side. APP, Summit/APP, and APS bench primer is what I'll use the right (end) one for. The left one is for the Pro 6000 and temporarily the Rock Chucker.....but I'm probably going to mount my RockChucker on another bench permanently....it's just not ready for it yet.
I use the RCBS lockout die for pistol, but I plan to use a video system for rifle that does not require a station. (not built and not set up for the 6000 yet). This is why: On the Pro Chucker I am using the a Gold Medal bushing die set from RCBS to load my .223 minus the expander rod, because I also use RCBS's rifle bullet feed die with it's 'M' expander, then the Gold Medal seater. Concentricity is fantastic with that combo. So what my intention here is....is to move all that to the 6000 and use the other press for just .308. May change my mind down the road, but for now, that's the plan, but, and it's a big but....that requires 7 stations if I have a powder cop. On the 6000 it will be:
1. Sizing
2. M expanding and priming
3. Powder
4. bullet feeding from electric collator
5. seating
6. taper crimping.
Using a bullet feeder/collator, with even with 6 stations, there's still no room for powder level checking. So.....
The plan is to build a combination lighting and video powder check for the 6000, like I did for the 5 station Pro 2000. Video below shows how it happened on the RCBS progressive. Just have to come up with a plan to do something similar with the 6000. With the 7 station Pro Chucker, that wasn't necessary. Honestly, I never thought I'd want to use up 7 stations for "rifle".
The other new possibility is the new NOE powder-through expanders for Lee's powder-through powder dies! Save another station for pistol and rifle!
Now there's another reason to buy the kit and have Lee's p.m. Imagine a powder thru "M" die/expander....for RIFLE!